Picture
Loading
Delle Vedobe
MM150
FOB: Shipping
Point DELIVERY: Immediate Subject to Prior Sale TERMS: Payment with order.Minimum
of a $125.00 Crating Fee if needed. Prices are subject to change without notice.
Used equipment is sold as is, where is, unless otherwise specified. SELLER
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Freight, rigging, and installation are not included unless otherwise
specified, but arrangements can be made at an additional cost.
We reserve the right to correct clerical or specification errors at anytime.
All figures USD unless otherwise noted. ATFS=As Taken From Service.
 |
Sanding
Media |
|
Sanding
Brushes:
Made of
Mexico Fibres
|
| Socket:
Made of aluminum and can be used with all types of sanding strips |
THE
NEW MM150
The High Performance coating capability of the MM150 increases production, lowers
costs and virtually levels the playing field for small and medium size companies.
A throughput speed set at 150 feet per minute will produce a mile of moulding
an hour with consistent quality.
The Aluminum Frame mounted on Powder Coated Legs with Powder Coated Denibber
Housing, and Aluminum Articulating Gun Arms are indicative of the quality that
will provide years of dependable service and satisfaction.
The 3/4-hp hazardous location motor is equipped with an AC variable speed inverter
that provides 110v single-phase plug-in convenience.
The MM150 is designed to accommodate 30” minimum lengths, and 12”
maximum widths.
(Optional smaller minimum length and wider maximum width available)
THE OPERATION
The MM150 is equipped with three automatic air-assisted airless spray guns,
manifolds and tips.
The automatic guns work in conjunction with an air logic controller, which controls
the opening and closing operating times of the spray guns.
The Spray guns are both solvent and waterborne compatible.
Thanks to their simple operation and maintenance, MM150’s guns do not require
expert or skilled operators. Coating product is fed to the spray guns by means
of the dependable Kremlin or Graco piston pump.
It is multi-gun capable and delivers material on demand at operating fluid pressures
to 1200 psi.
The stainless steel body is chemically compatible with today’s finishing
materials and solvents.
Paint transfer efficiencies to 75% or more are common in controlled systems
like the MM150. The reasons are higher volume of atomization air at lower pressures,
timely gun triggering, and the most accurate and efficient angle of gun position
relative to the part being sprayed.
Delle
Vedove MM150 In-Line Finishing System
System
Capacities
Infeed speed 100 to
150 FPM
Motors and controls for 115V/60Hz/15amp
Air pressure 80 psi
Minimum product length 29",
Maximum product cross section 12" x 3"
