In-stock
sales of new items from the JGW Co. warehouse are subject to incoming and outgoing
freight charges.
FOB: Shipping Point
DELIVERY: Immediate Subject to Prior Sale TERMS: Payment with order. Minimum
of a $125.00 Crating Fee if needed.
Prices are subject to change without notice.
Used equipment is sold as is, where is, unless otherwise specified.
SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR PURPOSE. Freight, rigging, and installation are not included unless otherwise
specified, but arrangements can be made at an additional cost. We reserve the
right to correct clerical or specification errors at anytime. All figures USD
unless otherwise noted. ATFS=As Taken From Service.
Lobo 4-Roller Power Feeder
- Model No: ST-483FD
- 4 SPEED 4 ROLLS FEEDER
- Powerful feeding strength
- One can freely and
simply assemble, dismantle and adjust it,
- It may be installed
on a circular saw, shaper, sander, router, or planer serving as one's third
hand at work.
- There are 4 feed rollers
on this feeder.
- Each roller has a suspension
to hold simultaneously the work piece at different degrees of thickness.
- It is also used to
help the feed pressure. In case you need a large space between the rollers,
you can take off the middle roller so the remaining rollers may be used
for curve driving.
- For a spindle moulder,
the feeder may be adjusted to the horizontal direction for side feeding
to meet the requirements of various processing conditions.
- There are 2 sets of
matching & interchangeable gears of variable sizes to create four different
ST-30FRL
EXTRA ROLLER EACH FOR ST-30 $25.00
ST-30BT
EXTRA BASE EACH FOR ST-30 $39.00
| SPECIFICATIONS |
ST-483
FD |
| Feeding
|
6 ~ 102
|
| Roller
Size |
4-3/4"
x 2 |
| Motor |
1 HP,
1 PH |
| Roller
|
1" |
| N.W. |
147 LBS |
| G.W. |
153 LBS |
