Biesse

Suction block VC-B 140x114 mm
With sensing valve

Dimension: 140x114x29 mm
Article-number: 10.01.12.01136 $105.60
Suction plate( top) 10.01.12.00228 $ 33.62

Suction block VC-B 125x75 mm
With sensing valve

Dimension:         125x75x29mm
Article-number:    10.01.12.01152 $105.60
Suction plate( top) 10.01.12.00011    $ 33.62

Suction block VC-B 120x50 mm
With sensing valve

Dimension:                   120x50x29 mm
Article-number:        10.01.12.01151 $128.17
Suction plate( top) 10.01.12.00012    $ 36.77

Suction block VC-B 130x30 mm
With sensing valve

Dimension: 130x30x29 mm
Article-number: 10.01.12.01149 $128.17
Friction plate( top) 10.01.12.00804 $ 16.29

Adapter VCBL-B 130x130

Dimension: 130x130x16 mm
Article-number: 10.01.15.00279 $180.18

Adapter-Plate ISAP-B 195x195

Dimension: 195x195x5 mm
Article-number: 10.01.14.00109
Price $308.87
(mono base and cups sold separately)

	Cup 1: Dimension: 80x80x16 mm Article-number: 10.01.15.00209 Price $64.89
	Cup 2: Dimension: 80x40x16 mm Article-number 10.01.15.00210 Price $64.89
	Cup 3: Dimension: 80x28x16 mm Article-number: 10.01.15.0021 Price $ 64.89

John G. Weber Co., Inc.
920.452.4494 Fax: 920.452.4395
1133 S. 7th St., Sheboygan, WI 53081 www.johngweber.com

The proven vacuum clamping system VC can be used universally on CNC machines made of an Italian manufacturer (Biesse) with an aluminum profile shown on the bottom. The standard height is H=29 mm. As a result of the new shape of the sealing lip on the surface of the suction block, we have a noticeably higher holding force. Damaged rubber sealing plates are easy to replace. With our great variety of different dimensions of vacuum blocks you always have the right block for any application!

Grid Table Adapter
In working with Point to Point machines and Nested Base machines there are not many options for using the same clamping pods for both. Now there is an option. By placing the Biesse adapter plate over a vacuum port on a Nested Base machine a customer can use the Point to Point pods on both types of machines.

On Biesse Point to Point machines there are very few options to allow for users to clamp smaller parts than the standard pods offered. Now by using the Innospann Adapter we can place smaller clamping pods on the machine to grip smaller parts.