INDUSTRIAL WOODWORKING EQUIPMENT CATEGORIES

BORING
CLAMPS
DUST COLLECTORS
EDGE BANDERS
EDGE FOILERS
FINISHING EQUIP.
GLUE SPREADERS
JOINTERS
LAMINATION
MATERIAL HANDLING
MISCELLANEOUS MACHINES
MOULDERS
PANEL SAWS
PLANERS
PRESSES
RIP SAWS
ROUTERS - CNCs
SANDERS
INDUSTRIAL SAWS
SHAPERS
T- MOULDERS
TENONERS
ACCESSORIES
AIR COMPRESSORS
STILES SHOP SOLUTIONS Special Values
PARTS
SERVICE

TigerFence, TigerTurbo and Tiger Heavy Duty - PRICES SLASHED CLICK HERE for DETAILS
TigerStop announces Great Savings on TigerCrossCut, TigerFence, TigerTurbo and Tiger HeavyDuty.
Call for a quotation on your project! 920.452.4494
TigerFence Slashed to $2,995 from $4,295 - Save $1,300!
Don ’ t buy a new saw; upgrade the one you have with a super precise CNC TigerFence!
TigerCrossCut Slashed to $3,295 from $4,495 - save $1,200!

TigerTurbo and Tiger HeavyDuty
Save $1000s - Click Here for Details

Not applicable on previous orders, can not be combined with other offers, payment with order.

Enjoy Huge Savings
On Techniks Certified
Router Tooling Pkgs.
CLICK HERE

sawgear

Portable Profits with SawGear
Cut In the Shop or In the Field
Click here for more Details - PDF Form


47% OFF
Original Replacement Pads
for CNC Machines ... Click Here

Schmalz

TigerStop


MELLOTT ROUGH MILL EQUIPTMENT -
Must Sell, no longer needed for production!
   

INCLUDES 7 Ton Hilt Hoist Lumber transfer, Unscrambler, Live Roll, Live Roll second section and Dual Purpose KO Transfer.
Coping machine
 
Schmalz Ergonomic
Material Handling
H49-HPJ CNC Point to Point
This machine available for demonstration in our showroom!

Straight Shooter Oliver Rebate

Click Here for Details

NEW WEAR PARTS CATALOG
Online - Click Here
for Jenkins,Greenlee, Mereen Johnson
and Many Other Machines
    AIR COMPRESSORS
NOTE: If you don't see a size that you are looking for, Please Contact Us. 1-920-452-4494 or email us at Customer Service
Ingersoll Rand Air Compressors 5 to 25 HP       pic      New
Type 30, Two Stage Cast iron Compressors. A variety to choose from in the "Value Package" and "Fully Packaged" models.
Ingersoll Rand
Base Pricing
trans
Ingersoll Rand Air Treatment Equipment      pic      New
Each refrigerated air dryer cools the compressed air by mechanical refrigeration to 33-39 degrees . . . . . more info
Ingersoll Rand
Base Pricing
Kaeser Air Compressors and Accessories     pic      
Look at a diverse selection of Kaeser Rotary Screww Compressors, Air Filtration, SmartPipe, Eco Drains and more.
Call for
Pricing
Le Roi 30HP Rotary Screw Air Compressor    pic     
As Is, Will be Cleaned by seller prior to shipment. 30HP. 230/460V, 3PH Motor.
$895
Saylor Beall VT735-80 Air Compressor      pic      (A-1-001) New
Voltage: 230v/3PH/60Hz Description: 5 HP, 80 Gallon air tank, 515 RPM Model,
27.9 CFM Displacement, 22.2 CFM Delivered, Dimensions 63"x21"x47"
Call for
Pricing
Saylor Beall/VT755-120 Air Compressor      pic      (A-1-002) New
Voltage: 230v/3PH/60Hz Description: 10 HP, 120 Gallon air tank, 850 RPM Model,
46.0 CFM Displacement, 36.6 CFM Delivered, Dimensions 69"x24"x51"

$5,291

   Boring Machines
tran
Did you know that a mortise and tenon face frame is stronger
than a counter bored and screwed together face frame?
Here is proof: You can watch a video of the test here: Woodworking Joint Torture Test
Did you know that a mortise and tenon cabinet door is two times stronger
t
han a cope and stick cabinet door?

Here is proof: You can watch a video of the test here: Wood Joint Torture Test II
Accu-Systems
Still don’t believe me? Here is another test performed by Fine Woodworking Magazine CLICK HERE
If you would like a hard copy of the tests please call us and we will gladly send them to you.
This is how you can build a better product and save time in assembly as well!
Call about which Accu-Systems machine would be right for you! 920.452.4494
Accu-System CXD Series    pic   
CXD SERIES is our CNC operated Double Sided Machines. This series is available in different configurations and sizes.
Call
For Pricing
tran
Accu-System HP Series    pic   
CNC Horizontal and Vertical axes. Larger that the HPJ, multiple zones can be utilized to load one side while the other is machining.
Call
For Pricing
tran
Accu-System HPJ CNC Point to Point    pic   
The HPJ machine is CNC controlled. The easy to use programming allows you to drill, glue, and insert dowels at any intervals.
H49-HPJ CNC Point to Point
This machine available for demonstration in our showroom!
Call Today!
Call
For Pricing
tran
Accu-System HPMT Series    pic   
The HPMT SERIES machines are CNC controlled point to point mortise & amp; tenon machines with easy to use controls and exceptional reliability.
Call
For Pricing
tran
Accu-System MMTJ    pic   
The MMTJ machine is CNC controlled and will miter, mortise, and tenon. The winner of the Challenger award, there are hundreds of MMTJ's currently in operation in the US. More info . . .
Call
For Pricing
tran
Cemco Vertical Boring Machine       pic       (B-1-077)
Model 84 " SBM. Serial SVB-1196. Good Cond. ATFS. 230/460V, 3PH 84 " x 24 " boring area . . . more info
$5,990
trans
Conquest 2-46 Dual 23 Spindle Line Boring Machine      pic    (B0133)
With Four flip Stops & 132" Fence Capacity! Pneumatic Operation. 132 " Fence Capacity. 2 Pneumatic Index Pins. 2 Pneumatic Hold Downs. 4 Heavy Duty Cast Flip Stops. Telemechanique Control System. Heat Treated Steel Helical Gears . . . more info
$9,944
tran
Conquest Mini 13" Line Boring Machine       pic     (B0111)
8 " Throat Opening (capacity to drill from edge of board). TEFC BALDOR Motor, Dust Protected & 3,450 rpm For Quick, Easy & “ Clean ” Drilling Low Cost True Industrial Duty Machine For The Serious Cabinet Builder. . . . more info
$1,495
tran
Conquest Pneumatic 23 Line Boring Machine       pic    (B0122)
With Four flip Stops & 132 " Fence Capacity! Pneumatic Operation. 132 " Fence Capacity. 2 Pneumatic Index Pins. 2 Pneumatic Hold Downs. 4 Heavy Duty Cast Flip Stops. Telemechanique Control System. Heat Treated Steel Helical Gears . . . more info
$4,360
tran
Ganner 220 Hinge Boring/Insertion Machine       pic    (B-1-085)(w)
Good Cond. Cleaned, Checked, Powered up 1.5 HP 230V/460V, 3PH motor Serial 58 641 Hinge drilling and insertion machine, not equipped for line boring.
$699
tran
Ironwood BR23 Boring Machine       pic     (BR23) NEW
The IRONWOOD BR23 Construction Boring machine provides a 23 spindle universal drilling solution, with horizontal and vertical boring capabilities and a fully automated pneumatic tilting of the boring unit from 0 to 90 degrees.
Starting Under
$7,500
tran
Ironwood DBR50 Double-Line Boring Machine       pic     (DBR50) NEW
The unit is ergonomically designed in system 32 for applications which require the drilling of multiple rows in a single function. Catering to the American woodworker, this robust drilling machine boasts quick set-up times, digital readouts for improved accuracy, and a convenient large working surface for all applications.
Starting Under
$15,500
LOBO BR- 2132 Boring Machine    pic    (NW-1011)     IN STOCK
Line Construction, 21 DRILLS UNIVERSAL BORING M/C   
NEW 2 HP direct drive mechanism for high torque during boring cycle Variable stroke speed. Fine vertical and depth adjustments. Heavy-duty sheet metal frame, full cast iron components and table. Magnetic switch for power protection. Pneumatic controls, automatic stroke. Standard quick change drill chucks to easily change boring bits.
NEW IN STOCK
$3,990
LOBO Vertical Multiple Boring Machine DR-204 2' x 4'    pic    (NW-1016)
NEW   Fully Cast components. Convenient oil pump for hydraulic power. Each spindle can be adjusted forward/backward and left/right directions for flexible hole positioning. Easy and efficient hydraulic table with an up and down stroke for drilling operation. . . much more info . . .
NEW
$10,900
Pringle and Brodie 6SH Horizontal Boring Machine      pic     (B-1-067)     Price was: $2,250
Year/Cond:1910 Voltage:220/440. 3 Horizontal Double Spindles, two double spindles on the top rack and 1 on the bottom rack. gear driven system off a single motor.
Sale Price
$1,500
  Ritter R13F Custom Boring Machine       pic       (B-1-084)
Ritter R-13F with a custom 4 spindle drill head, apparently set up for hinge drilling. The back set of spindles on the head have approx. 70mm centers, the front set of spindles have approx. 40mm centers. . .
$695
  Ritter R-800 Horizontal 2 Double Spindle Boring Machine       pic       (B-1-083) (W)
Model R800. 1980 model year. Machine is designed to clamp and hold a workpiece while boring one to four holes horizontally into it. Complete and functioning machine which was cleaned and checked by our technician. (2) 1HP belt driven motors each drive a double spindle head. The double spindles have 2" fixed centers . . .
$695
To Top of Page
    Dust Collectors
AEROTECH DUST FREE NESTING
The Aerotech System is specifically designed to assist your machines duct extraction system. The technology helps in the removal of dust and debris during operation. The development of the Aerotech System followed an extensive series of fluid dynamic tests and analysis to increase air-flow velocity at the point-of-cut, thus providing a radical improvement in dust evacuation. In developing the Aerotech System we have applied our engineering skills and experience to address problems specifically inherent to nesting and conventional CNC routing.
Call 920.452.4494 today for more information and to set up a free deomonstration on your machine!
MORE DETAILS - PDF format       VIDEO: CLICK HERE
Aerotech
trans
Argos International Pure Clean II     pic     (V-1-142) (W)
Older Air cleaning unit for removal of Welding, grinding, bondo dust. Can also be used for woodworking dust, printing toner, paper dust other dust and fine particulate collection. Designed as an air cleaner though, not for heavy dust collection.
$995
pic
AutoAire Gates by K&B Duct     pic  
Industrial Grade Air Operated Stand-alone Automatic Gates or Controlled Gate Systems. AutoAire Offers Total Dust Collection Control. Find out more . . .
Call for
Pricing
pic
Denray Down Draft Table     pic     (DD-2872)
Model 2872 features the new tube filtration system, which cleans with a 99% capture rate at 1 micron. These tables are very popular with the small to medium sized shops.
Call For
Pricing
pic
Dustek Dust Collectors    pic     NEW     
Models: Dusty JR-30, Dustek C300, Dustek C750 and Dustek C1000
$699 to
$4,100
pic
Jet DC1100 Dust Collector     pic     (V-1-146)
Year/Cond:2001, ATFS. Voltage: 115/230 1PH/ 60Hz. Industrial-quality construction effectively handles collection of wood chips and sawdust Quick-install collection bag makes emptying and re-attaching a snap. Single-stage design for economical and quiet operation.
$300
pic
Kufo UFO 101, 2 HP, Dust Collector     pic    
Motor 2HP. Inlet diameter 125mm X 1 ( 5" X 1 ).
Call for
Pricing
pic
Kufo UFO 102B, 3 HP, Dust Collector     pic     (V-1-127) NEW
Motor 3HP. Air volume 1925 CFM. Packing Size 48 " X 23 " X 23 " . Net weight 169 lbs. Gross weight 180 lbs.
Kufo Dust Collector order with Canister type filters becomes Model 102BC, and is $1,019.
$575
gif
Kufo UFO 104D, 10 HP, Dust Collector     pic     (NW-104D) NEW
Motor 10HP. Air volume 4167 CFM. Four (4) Bag dust collector.
Kufo Dust Collector order with Canister type filters is $3,589.
Call for
Pricing
gif
Kufo-Seco UFO-104D 10HP, 4 Stack Dust Collector.     pic    ( V-1-143)
Motor 10HP. Air volume 4167 CFM. Four (4) Bag dust collector. Excellent condition overall,   less than 10 hours use for some demonstrations of other equipment requiring dust collection.
$2,379
Lobo 2 HP Dust Collector    pic    (NW-2008) NEW
Model No: DC- 101. 2HP DUST COLLECTOR. This model has a Radial-fin type steels impeller to get the best efficiency usage. One top filter and one bottom collection bags. Vehicle casters for easy portability. . More . . .
New
$359
Lobo 2 Stage Dust Collector    pic    NEW  
Model No: DC-03STA. 3HP, 3 PH, Two Stage DUST COLLECTOR. Heavy sheet metal frame and base. Extra large radial-fin type steel impeller for high efficiency air flow. Heavy duty totally enclosed industrial motor for maximum air suction and extended service life More information.
New
$1,190
Lobo 3 HP  Dust Collector    pic    (V-1-131) NEW  IN STOCK
Model No: DC- 102. 3HP DUST COLLECTOR.Radial-fin type, high-efficiency steel impeller.
Two top filter and two collection bags. Heavy-duty motor for powerful operation. More . . .
New IN STOCK
$599
Lobo 5 HP  Dust Collector    pic    (NW-2007)NEW
Model No:DC-805. 5HP DUST COLLECTOR. Radial-fin type, high-efficiency steel impeller.
Two top filter and two collection bags.. Heavy-duty motor for powerful operation. More . . .
New
$1,390
Murphy Rodgers Dust Collection - MRT-9A    pic    (V-1-144) (W)
Model MRT-9A 5HP TEFC, 230V, 3PH. Condition: Used, Cleaned, Checked by our technician, ready for re-installation. This collector has a Radial-fin type steel impeller which helps ensure the unit will maintain efficiency and durability. This impeller is more durable than the nylon/plastic impeller's on other units.
$895
Murphy Rodgers Dust Collection - MRM-12    pic    (V-1-148)
A highly effective dust collector, ruggedly design4ed to do a first class job on most types of dust.
Call For
Pricing
Torit DFO 2-4 Dust Collector     pic    (V-1-145) (W)
• 7536904, Delta P Control w/Timer • AD3109901, TBI PWR 10 hp STL 208-230/460/60/3 (Includes MTR) • 3628001, Damper Assy 10 hp • AD3720204, High Performance Silencer 10 hp 10" diameter inlet, 8" x 10" squared outlet.
$14,895
    Torit Dust Collectors      (Torits_1209)      Smaller units:  $1200 for 5 hp and $1500 7 Hp $1200 for 5 hp
$1500 7 Hp
To Top of Page
    Edge Banders, T-Moulders, Edge Foilers
NOTE: All edgebanders, new and used, require installation and operator training by a qualified edgebander technician to ensure proper functioning and operation. Used edgebanders may require general cleaning, fine tuning, as well as the cleaning of the glue system due to the fact that they came out of a production environment.
gif
Adamik Edge Bander     pic      
MANUAL PLUS model. A portable edge banding machine equipped with hotmelt gluing, temperature adjustment system and automatic feeding for ABS / PVC / veneer / melamine.
$3,495
Brandt Optimat KD 56 CP Edge Bander     pic     (I-1-152) (W)
2002 Good Condition, Cleaned, Checked. Model Optimat KD 56 CP. 3mm capacity, contour corner units, Units in/out by AF. Much more information. Call Us Today 920.452.4494.
$31,500
Brandt Optimat KD 56 Edge Bander     pic     (I-1-153) (W)
Good Condition, 1997 Model Optimat KD 56 . 0.4 - 3mm (0.016 " - 1/8") edge thickness capacity. 8mm - 40mm (5/16" - 1-5/8") panel thickness.
$12,995
Brandt KDN 520 Edge Bander     pic     (OD-1006)
Follow this link to view pictures of this edge bander. Call 920.452.4494 for information and pricing.
DMG-Fletcher-52CT Top and Bottom Lip Trimmer     pic     (I-1-122)
Year/Cond: 2000 Voltage: 220V, 3PH, 60Hz Top and Bottom Lip trimmer for straight and curved
edge panels. Two spindles, 1 top and 1 bottom. 15 degree bottom head bevel adjustment.
$6,000
Evans Model 1050 T Mould, T-Nose Inserter with Cut-Off Function     pic     (I-1-154) (W)
Low use, was stored for quite some time. Still in good condition. Cleaned, checked. Machine is from the early to mid 90's. This machine will give you complete application of T-moulding, producing a smooth, even, contoured edge applied to table tops, countertops, door & drawer fronts.
$4,995
Holz-Her 1408 Edgebander    pic   (I-1-156) (W)
1984, Cleaned, not checked, came out of production from a Illinois manufacturer that shut down. Cartridge Glue System. 3/4" Maximum banding capacity. 1/4" - 2 1/2" panel thickness. Equipped with an automatic strip and coil feed magazine with guillotine and 5-roll pressure section. Double motor end trim units, .75HP, 5,500 RPM motors each, Chamfers 0-10 degrees. Top and Bottom Flush and bevel trim units, 1.5HP, 12,000 RPM motors each.
$3,195
HOLZ HER 1436 Express Edge Bander   pic   (I-1-436)
Automatic w/1941 Buffing. WORKING STATIONS: • End Trim Unit c/w 2 HF motions @ 0.3 kw each – 1800 RPM, chamfer to 15° - edging up to 13mm thick • Flush Trim Unit c/w 2 HF motions @ 0.6 kw each – 1800 RPM, horizontal and vertical tracers, tiltable 0 to 15° • Buffing Unit c/w 2 motors @ 0.15 kw each – tiltable up to 45° . Much more information - See listing.
$6,250
Homag SE-6400 Edgebander   pic   (I-1-158) (X)
Late 80's, Early 90's. 230/460V, 3PH machine. Good operating condition, still in service. .4-20 mm edgebanding capacity. 70mm min. panel width. Automatic edge feed magazine for coil, HPL, and strip stock.
$6,995
SCMI Olimpic MS1 88 Edgebander    pic    (I-1-159)(w)
Year/Cond: 1997. Voltage: 460V/60Hz/3PH. Edgebander has Snip Saws, Rough Trim, Fine Trim, Corner Rounding, Scrapping Unit, Buffing Units. Call for more details. ATFS Service Condition, all units functioning. No longer under power.
$24,550
SCMI Selecta 20-F Edge Bander    pic    (I-1-135) (W)
1997 Very good Condition. 240V, 3PH Motors. 3/4" edgebanding thickness capacity. 2 3/8" Minimum panel width, 5 1/2 Minimum Panel Length. Automatic strip and coil feed magazine. 4mm PVC guillotine. Teflon Coated Glue Pot. 5 roller pressure section. Front and Rear End Trim motors, .75HP ea. Motors tilt 0-15 degrees on horizontal plane. Top and Bottom flush/bevel trim motors, 2.5HP ea. Motors bevel from 0-45 degrees with digital readouts . . . much more info . . .
$19,900
To Top of Page
    Finishing Equipment
AM&D 100 Vacuum Coaters    pic    Used, 2 Operating & Parts $15,000
Cefla Profiplus Profile Finishing Systems    pic    (NW-1013)
These finishing systems offer high flexibility in use and can be used to paint a wide range of profiles such as moulding, picture frames, cabinet and wood flooring components.
NEW
Call for
Pricing!
Delle Vedove MM150 In-Line Finishing System    pic   
The MM150 is equipped with three automatic air-assisted airless spray guns, manifolds and tips. The automatic guns work in conjunction with an air logic controller, which controls the opening and closing operating times of the spray guns. Much more info . . . .
Used-Available
Call for
Pricing!
Delle Vedove MM 150 Sprayer    pic    $11,000
Diemco Spray Stain, Wipe    pic    $15,000
DriQuik Infrared Drying Bank of Lamps    pic    Call for
Pricing
JBI Spray Booth JBI Dry Booth Spray Booth    SN. 38745-A Year 2002    $2,000
MAKOR CSP90 Linear Sprayer, 6 Guns    pic   
Good condition. 8" wide, six guns, 2 zones. Includes six Iwata HPLV guns and two pumps (new $1,200 each) More info . . . .
$15,950
MAKOR Profile Sander    pic    $27,000
MAKOR Profile Sprayer    pic    $22,500
MAKOR Automatic Stacker    pic    $19,500
  Call with any needs you may have - 800.793.4424  
To Top of Page
    Glue Spreaders, Lamination Equipment, Presses, Clamps
Black Brothers Top and Bottom Glue Spreader    pic   
New, Used and Reconditioned - Call us 920.452.4494
Starting at
$21,995
Black Brothers Top Glue Spreader    pic    (E-1-022) (W)
Model 22D 500 08 Originally manufactured 1956, Cleaned, Checked, Fair to O.K. condition. Rolls recovering would be suggested. New bearings would be suggested. Available "as is" or can have rolls recovered, bearings put in, etc. please inquire. 8" working width, 5" diameter neoprene rubber coated rolls. 3" chrome plated doctor rolls. Lower elevator opens 0 - 3" Fixed speed of approx. 60-80 FPM via 3/HP 230/460 Volt motor. Needs a motor starter Safety reversing bar, safety guards, warning label/safety kit.
$2,195
Evans Coving Machine    pic    (E-6-007 )
Can be viewed or demonstrated in our warehouse.
Model 0190, Coving length 12', backsplash height max. 34", min. 1", 110V, 1PH.
Sale Price
$2,995
Holz-her Case Clamp    pic    (A-2-051)
Year Unknown / Good Condition ATFS. 48x28x96 Capacity, Pneumatic operation. (3) Vertical and (2) Horizonal Pressure zones. Movable Lower Rest.
$3,000
gif
JLT Double Door Clamp 79K-7   pic    (A-2-050)   NEW
Voltage: None. 38" x 84" Maximum Capacity. 2 horizontal pneumatic clamps.
4 vertical pneumatic clamps. More information . . . .
NEW
$4,395
gif
Membrano Vacuum Membrane Press Duo 49  pic    (K-1-013) (W)  
Mercury vacuum press thermal foil machine combination. Unit has 2 tables 49 " x 49 " linked together with a usable platen dimension of 46 " x 46 " when laminating top and edge profiles.
$6,595
To Top of Page
    Material Handling
Advance Lifts 4,000 Lb. Cap. Lift Tables       pic       (NW-1014)
Model #: P-4036, 36 In. Travel If it's heavier loads you're dealing with then you need this 4,000 lb. capacity Standard Duty lift table. For longer life, the legs, like all Standards and Deluxe Duty lifts, are formed, drilled and reamed in a machining center for exacting tolerances rather than rough flame cut and hand ground for final fit-up. (Available with 24, 36, 48, 60 In. Travel)
NEW
$2,735
Air Technical Industries UpEnders    pic       (H-4-020) (W)    3 Available
Cleaned and Checked, . Model SCP2000E. 1HP, 115/208-230V Motor, 1PH. Currently wired for 115V. 2000 lb. capacity, Tilts lengthwise--up to 90° .. . . . more info . . .
$1,200 Each
   ForkLift Dump Cart         $150
Heavy Duty Carts - for Shop, Furniture, Shipping    pic       (H-4-022) (W)       9 Available
Custom Made. Each cart has 6 Heavy Duty casters. Each caster has hard cast plastic wheels. Swivel bearings have grease fittings, they do not lock. They are 90" Long, 30" Wide. More information is available.
$895 for All 9
2G and 3G Series Lift Tables by Lift Products       pic       NEW
The G-Series is designed to outshine competitive models in this popular light duty catagory by simply offering more quality features at a competitive price.
NEW
See Listing
Lift Products Guardian Lift Tables       pic       NEW
The Guardian Series represents the ultimate in lift table safety with features that are optional or not available on other lift tables. All "Guardian" Series lift tables meet and exceed both U.S. (ANSI) and European safety standards for lift tables. These models can be used in above-floor or in-floor applications.
NEW
Quotes
Available
Lift Products MAX-M22 Lift Tables       pic       NEW
The MAX-M22 series lift table is designed for those medium duty applications where a lift table is required. Similar in design to premium MAX-LIFT series the M22 is a quality table that offers an economical solution.
NEW
Quotes
Available
Lift Products MAX-LIFT Scissors Lift Tables       pic       NEW
The best value in lift tables with unparalleled features! Reduces awkward bending and lifting since the work load is always at the correct level. The possibility of back injuries is also reduced and productivity is increased.The MAX-Lift is a superior scissor lift table currently offered in the 2000-6000 lb capacity range.
NEW
Quotes
Available

Lift Products ROTO-MAX Lift Tables       pic       NEW
The Ultimate in Ergonomic Work Positioners
Roto-Max was designed from the ground up with the operator in mind. The Roto-Max electric hydraulic work positioner places the load at the operators discretion to determine where he or she would like the work load positioned. It doesn't matter how short or tall the individual is since the operator determines the most comfortable working height. The Roto-Max allows complete flexibility to do the ergonomically safest job with maximum efficiency. Whether the load is one pound or 3,500 pounds, the positioner height does not change until the individual wants it to change. With a lowered height of only 6.5", an operator has easy access to the top layer of product. The raised height of 32.5" (plus pallet height) is ideally suited for most applications. The 43" diameter top rotates easily, thus giving the operator access to product without having to stretch or walk around.

NEW
Quotes
Available
MELLOTT ROUGH MILL EQUIPTMENT - Must Sell, no longer needed for production! pic   
INCLUDES 7 Ton Hilt Hoist Lumber transfer, Unscrambler, Live Roll, Live Roll second section and Dual Purpose KO Transfer.The Mellott 7 Ton Tilt Hoist is designed to unstacks tickered packages of lumber. The standard machine is designed for 66" high x 72" wide x 18' long packages. Heavy construction and a simple design are used through-out the 7 Ton Tilt Hoist in order to keep maintenance and downtime to a minimum. Much more information and pictures available - see listing.
Call for
Pricing
Schmalz Lifting Unit HE 85-E/S-1700-ADM   Part # 11.01.18.10403 /1
Lenght of lifting tube: 2,550 mm. Diameter of lifting tube: 178 mm. - Quick coupling system to change the operating handle (Ergo and Sprint Version) - With protective covering for lifting tube with Schmalz Logo
$1,813.76
Schmalz Directly Driven Vacuum Blower   Part # 11.02.05.10077 /0.
Brand new, never set up or used! SBM-155-500-230/400V-50/60-3-DBV. Accessories: vacuum safety valve and exhaust silencer.
$4,423
Schmalz Operating Handle BE 85-250 Sprint ADM   Part # 11.01.19.10161 /0.
Brand new, never set up or used! For lifting tube with diameter 178 mm. Distance control handle/ middle of appliance 250 mm incl. quick change sytem up to lifting unit.
$1,758.64
Schmalz Operating Handle BE 85-350 E ADM   Part # 11.01.18.10405 /0.
Brand new, never set up or used! For lifting tube with diameter 178 mm. Distance control handle/ middle of appliance 350 mm incl. quick change sytem up to lifting unit.
$1,758.64
Schmalz Quick Change Adapter   Part # 11.04.06.10016 /0.
For changing suction pads without tools. SWA-35-300-BE for Operating unit Maxium load: 35 to 300 kg. Brand new, never set up or used!
$235
Schmalz Single Suction Pad   Part # 11.03.11.10504 /0.
EG-85-245x245-NBR Maximum load: 85 kg. Suction pad length: 245 mm. Suction pad width: 245 mm. Suction pad height: 25 mm. Suction pad material: Perbunan NBR. Brand new, never set up or used!
$470
Schmalz Double Vacuum Gripper, Adjustable Suction Pads on a Beam   Part # 11.03.15.10704 /2  
DG-85-400-SPL245x145-NBR. Maximum load: 85 kg. Cross-beam length (long.): 400 mm. Gripper height: 90 mm. Suct. pads: Suction plate SPL. Suction pad length: 245 mm. Suction pad width: 145 mm. Suction pad material: Perbunan NBR. Brand new, never set up or used!
$880
Schmalz Double Vacuum Gripper, Adjustable Suction Pads on a Beam   Part #   11.03.15.11168 /0
DG-65/85-400-FM400x120-0.9-EPDM-95. Maximum load: 65/85 kg. Cross-beam length (long.): 400 mm. Gripper height: 110 mm. Suct. pads: Large-area vacuum gripper. Suction pad length: 400 mm. Suction pad width: 120 mm. This single suction pad is designed especially for handling inherently stable workpieces on which a 100% suction surface coverage is impossible. Brand new, never set up or used!
$2,573
Schmalz Sack suction gripper with flexible seal   Part # 11.03.14.10109 /2.
Brand new, never set up or used!SG-65/85-360x260-SWG-20. Maximum load: 65/85 kg. Suction pad length: 360 mm. Suction pad width: 260 mm. Suction pad height: 84 mm. Suction pad material: Foam rubber SWG 20±5ShA.
$733
Schmalz Round Suction Pad   Part # 11.03.13.10193 /0
RG-85-280-2K-SWG-20. Maximum load: 85 kg. Diameter: 280 mm. Suction pad height: 26 mm. Suction pad material: 2 Components SWG-CR 55/20. Brand new, never set up or used!
$470
Schmalz Quick-Change Adapter for Changing Suction Pads Without Tools   Part #   11.04.06.10005 /2
SWA-65/85-JUG for: Jumbo Gripper. Maximum load: 65 / 85 kg. External diameter: 175 mm. FIVE AVAILABLE.
$162 Each
Schmalz Dust Filter   Part # 11.04.03.10159 /0.
Brand new, never set up or used! Additional equipment: Hose clamps SSD, - Plastic housing with replaceable, filter cartridges, incl. bracket for wall mounting and 2 tube clamps,
$352
Schmalz Vacuum Regulation Valve for Controlling the Maximum vacuum   Part # 11.02.05.10109 /0
Brand new, never set up or used! Connection: 1 x Tube end Ø 60. with: Ball cock KVZ  for: Vacuum blower SBM/SBL.
$392

Schmalz Suction Hose VSL / G 50 PVC   Part # 11.04.01.50055
For Tube Lifter JumboErgo/Sprint PVC with ID 51mm. 30 Ft. @$5.25 ft.

$157.50
Schmalz Suction Hose Connector for Jumbo.   Part # 10.08.01.50032.
Brand new, never set up or used! Connects 50mm ID hose to blower, dust filter and lift tube.
$7.25
Schmalz Protective Motor Switch for 3 Phase Motor   Part # 11.01.01.50015
...with 10-16 amp adjustable rating and outer enclosure box. For SB-M blower at 208/230V-3 phase or SB-L blower at 460v-3 phase.Brand new, never set up or used!
$286
Schmalz Jumbo Ergo 85 Vacuum Lift Unit         pic         (H-4-023) (W)  NEW
Brand new, never set up or used! Includes both an Ergo and Sprint handle with 5 different vacuum heads with quick change adapter for various general lifting applications.
$11,495
Vacuum Lift System         pic         (VLS_1209) (W)   NEW
140 -lb. Capacity. Rails & bridge, Aluminum, Connecting kits for rails and bridge to seam lengths together. 6 ceiling mounted brackets. 2 rail trolleys (they glide the bridge up and down the rails). Hoist Trolley they is what the vacuum lift attaches to the bridge. Hose hanger trolleys, end stops, to prevent the bridge and lift running off of the end of rails. 2 " hose. $6500 with Beams and Brackets or $4500 for just unit with remote start.
$6,500
Sweed Bundle Turner SWEED BUNDLE TURNER
Sweed's Bundle Turner is an excellent option for facilities processing loads up to 5,000 lbs and 5' wide by 10' long. CLICK HERE for more information in PDF.
SWEED TURNERS: " C " , Pass Thru, Panel Turner
Units are available in Wide for 16 ’ or longer material; Giant, for the processing of exceptionally large units; Standard, for 8 ’ -12 ’ material; and custom sizes to meet any application need. CLICK HERE for more information in PDF.
Sweed C Turners
To Top of Page
    Miscellaneous Machines and Accessories
AEROTECH DUST FREE NESTING
The Aerotech System is specifically designed toassist your machines duct extraction system. The technology helps in the removal of dust and debris during operation. The development of the Aerotech System followed an extensive series of fluid dynamic tests and analysis to increase air-flow velocity at the point-of-cut, thus providing a radical improvement in dust evacuation. In developing the Aerotech System we have applied our engineering skills and experience to address problems specifically inherent to nesting and conventional CNC routing.
Call 920.452.4494 today for more information and to set up a free deomonstration on your machine!
MORE DETAILS - PDF format                                 VIDEO: CLICK HERE
Aerotech

CANTEK JDT75 Automatic Dovetail Machine       pic       (T-1-010) (w)
• 21500 RPM spindle rotation for an extremely fine finish on dovetail joints • High RPM spindle allows for precision machining of plywood & solid drawer sides • Independent adjustment of both the tenon and the mortise depth for precise fitting of dovetail joints • Dust hood for milling cutter • Safety rail in front of spindle motor . . . .

$8,170

Carter Inspection Light - SP14 Four Lamp       pic       (T-1-010) (w)
Year/Cond: 2008/ Used For Test. Voltage: 110V, 1 Ph. SP14 Four Lamp Inspection Lights. The Inspecto-Light inspection lights flood any flatwork with low-angle white light that makes high spots, low spots and other defects stand out at a glance. Ideal for veneer or sanding operations, the Carter Inspecto-Light inspection lights. . . .

$420

Chisel Pointer - Manual Model C1271M by Keystone Machine       pic       NEW
The chisel pointer, rather than having a point that resembles a pencil point, the chisel pointer makes points that resembles a "V"or a two sided stake.10 HP, 230-460 volt TEFC motor, Hyd. over air variable speed feed system, anti-kickback gate.2PC. 15 DEGREE,CARBIDE Indexible Tip Cutters. There are many options available.

$9,281

CopeCrafter CopeCrafter        NEW
The Copecrafter comes equipped with two clamping cylinders for superior holding. TWO methods of guiding the Copecrafter in a longitudinal plane across the shaper table: #1 A straight, Plexiglas template to guide on the vertical wood shaper fence or rub collar. #2 A 3/4 " wide steel bar that attaches to the base of the Copecrafter with two allen cap screws to guide in the miter slot on the saper table top. SAFETY: The material is clamped to the Copecrafter by means of two powerful air cylinders. With all "Crafter" family units, the operator's hands are away from the cutting tools. EASE OF OPERATION: The air flotation on the bottom of the copecrafter makes the unit very easy to guide across the shaper table top. Actually converts an ordinary shaper into a sliding table shaper, with the addition of the Copecrafter. Use to cut rails for rapid production.

$675

Coping Machine by PMK Machinery       pic      
The PMK Machinery Coping Machine was designed by a Door manufacturer to solve the problems blow out, splintering and chipping. It will give you a chip free cope on either single profiled parts, double profiled parts or square parts Both models have: unlimited length of parts; have two counter rotating 1 ¼ " spindles and motors are duel voltage 230/460 Volt.

$14,990 to
$16,990
Doucet End Press with Cut Off Saw       pic       (L-2-101) (w)
Doucet 6' End Press with Cut Off Saw (L-2-101) (W) Model: End Press 6', Serial 2008-09-030. Low use still on original shipping pallet. Designed for a near continuous gluing operation. Approx. 6 feet of layup area between the holddown shoe and pressing cylinder. Integrated, 14" capacity, 3HP, 220/440 Cut off saw. Can be viewed in our warehouse!   
Call for
Pricing
Eaton Transformer (Cutler Hammer)       pic       (W-090) (W)
For stepping down 480V Exceptional value, replacement cost is $4,980. Model 45 KVA 7753. Frame 480V Delta - 240V/120V Sec., Eaton Model number V48M22E45A. New 11/30/2002, Very little use, probably has more marks from handling/moving than anything, Very clean.
$1,795
ELTE Frequency Converter       pic       (G-4-002)(w)
Exceptional value, replacement cost is $5,500.
Also know as a Motor Generator Model 47.5 KW, 15 KVA New in early 1990's (Rebuilt in 2004 and never put into service) For older machines running high frequency spindles motors that need to convert to 240Hz. Converts 220/440 60Hz power to 220/440 240Hz power.. Can be viewed in our warehouse!
$750
Floor Sweeper - KLEEN SWEEP 35 by Minuteman       pic       (CM-TCS-2)
Model HM-360000 with Battery charger. Great condition. Does need new battery. Heavy-duty ABS cover opens wide for easy access to interior components. Steel body construction provides long life and protection. Large Capacity The 2.6 cu. ft. hopper recovers a large variety of debris. Its big capacity allows for sweeping large areas and its side door design allows for easy accessibility for waste removal.
$1,000
FP Industries Green Light Laser Green Light Laser
FP Industries has designed the Green Light Laser, which is highly visible in all lighting conditions. It has 8 times the brightness of an equivalent red laser. Call us, 920.452.4494 for more Info or PDF format, or : MMG Series    MLG Series
Gross GZ122 Hog Low Speed Waste Grinder       pic       (V2-014) (W)
1993 Year, SN 421/G2137ST Item is in good conditon overall, does need to have gearbox rebuilt. 48" x 60" Hopper Low speed waste grinder turns at 180 RPM. 50HP, 600V, 1,770RPM, 3PH, 60Hz Motor 84 replaceable tips on approx. 48" long grind head Separate control panel on wood stand Appropriate guarding for motor and moving parts is included. (not pictured) Observation deck. Price with Rebuilt Gearbox installed: $19,995.
As Is price:
$12,995
Kay Industries Phasemaker Rotary Phase Converter       pic       (W-088)
Model: MA-6-3641-1200.
Year/Cond: Unknown/ ATFS. Voltage: 230/460 capacity. 30HP Rotary Phase Converter. Max HP 30, Min HP 7.5. Please call with questions.
$2,750
Lobo Machinery Dovetailer    CM-A19    pic     (C-2-016) (w)
Heavy constructed steel frame and sturdy cast iron table. Four large air clamps hold down two sets of male and female dovetails which are cut in the same cycle. These parts then have a precise match. Automatically controlled jig manufactures precise circles and joints.Router head travels on precision ground guide rod, made from carbon steel coated with hard chrome, which provides cutting smoothness and accuracy.Three cutting speeds for the best finish when processing different materials. Easy operation and maintenance.
NEW
$9,890

Lobo Machinery Power Feeder 3 Roller       pic    NEW- IN STOCK (NW-2009) (w)
Powerful feeding strength. One can freely and simply assemble, dismantle and adjust it. It may be installed on a circular saw, shaper, sander, router, or planer serving as one’s third hand at work. More information available.

NEW
$649
Plus freight

Lobo Machinery Power Feeder 4 Roller      pic    NEW- IN STOCK   (NW-929C)
Model No: ST-483FD. 4 SPEED 4 ROLLS FEEDER. Powerful feeding strength. One can freely and simply assemble, dismantle and adjust it. It may be installed on a circular saw, shaper, sander, router, or planer serving as one’s third hand at work. Much more info . . .

NEW
$789
Plus freight
Midwest Automation SF2000S Postformer    pic    (SF-2000)
12" Swing, 36" length, 60" bed. Standing model. Good condition for age, still in production 1/2 hp, 3 phase motor. 600, 1200, 1800 & 3600 speeds. New tool rest & ball bearing tailstock cup center.
$10,000
Oliver 51D, Four Speed Lathe    pic    (G-1-010) (X)
12" Swing, 36" length, 60" bed. Standing model. Good condition for age, still in production 1/2 hp, 3 phase motor. 600, 1200, 1800 & 3600 speeds. New tool rest & ball bearing tailstock cup center.
$700
OMEC 450-M Dovetailer -Hand Operated Milling Machine    pic    (OM-450-M) New
The manual milling machine OMEC 450-M is utilized to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows machining of indents of adjustable height. The 450-M model can machine four types of indents with different pitches.
Call for
Pricing
OMEC 650-A Dovetailer - Automatic Numerical Control Machine for  Dovetail Joints    pic    (OM-650-A ) New
The two-axis automatic mill cutter with numerical control, OMEC 650-A, is designed to indent dovetails and parallel indents for drawers and several furniture elements. Model 650-A is equipped with a spindle and a mill cutter that allow the production of indents of different heights. The machine is designed to cut single male or female workpieces, or both simultaneously.
Call for
Pricing
OMEC 650-M Dovetailer - Hand Operated Milling Machine    pic    (OM-650-M) New
The manual milling machine OMEC 650-M is utilized to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches
Call for
Pricing
OMEC 750 Dovetailer - Automatic Milling Machine    pic    (OM-750) New
The automatic milling machine OMEC 750 is utilized to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows machining of indents of adjustable height.
Call for
Pricing
Rotary Phase Converters    pic   
Gentec American Rotary Phase Converters - Gentec American Rotary manufactures and distributes one of the the largest selections of phase converters in the USA. All proudly made in the USA. A complete selection of American Rotary Phase converters, Static Phase Converters, CNC Phase Converters, Digital Phase Converters, and Phase Perfect® Phase Converters are available to meet your electrical requirements.
Prices Vary
Ruvo 500 Pre-Hung Door Machine    pic    (B-5-005) (W)
1980's O.K. Cond., ATFS Multiple 208-230/460, 3PH motors The Ruvo 500 is a machine designed for residential, commercial and architectural door manufacturing where flexibility is important. The machine can process interior and exterior doors. . . . .more info
$12,995
Saw Blade Sharpening Station    (T-2-002) (W)
Wright Machine Tool Saw Blade Sharpening Station/ TF 850 TC. Year/Cond: 1992/ ATFS. Voltage: 230V/60Hz/3PH.
$3,500
Stake Pointing Machine - AUTOMATIC - Model 2072P by Keystone Machine Co. NEW    pic   
10HP 230-460 volt total enclosed fan cooled motor, pointer head with knives, 8". dust outlet, 1- Starter sq. D-8536 SDA-1 Nema 2 with Nema 12 enclosure. control panel, start & stop button for head motor, control button for manual cycle & control for automatic cycle. More information available in listing.
NEW
$11,000
Sunhill Junior Power Feeder Model AF-32 - NEW    pic    (NW-1-006)
Perfect for use with table saws, shapers and jointers. More efficient use of time. Reduced potential for injury.
More consistent results. Regular Price: $495
NEW
$459 - Sale
trans
Sweed Little Bandit Chopper    pic   
Model 300 Bandit. 1/2 HP Main Drive Motor. Standard Electrical: Single-Phase 120 volt. ... . . . .more info
$2,295
trans
TigerStop Automatic Stop/Gauge and Pusher System     pic     NEW
A Perfect addition to almost any machine tool in your shop where ease of setup, use and accuracy are required
Pricing
Varies
trans
TigerStop and TigerFence Rip COMING SOON -
Call us for all the details! 920.452.4494
Call for
Pricing
trans
Tyler French Dovetailer    pic    (C-2-018)
Condition: As Taken from Service. Voltage: 460V. Call for more information. 920-452-4494
Call for
Pricing
trans
Wiema WL8 Wood Grinder     
As Taken from Service. Voltage: 460V, 60HZ, 3PH. Vertical hopper fed Low Noise Grinder, 39-3/8" x 39-3/8" hopper opening (straight sided), 1.7 cu. yds. cap, Flared hopper for additional capacity; 10" rotor dia. with a 25 HP motor. . . .more info
$15,500
trans
WorkRite Welder Model 3000    pic    (NW-1-019)   NEW
Special Features ONE HAND OPERATION - leaves other hand free. RECESSED PANEL - protects instruments. RADIO FREQUENCY CERTIFICATE - per F.C.C. Regulations. 13 FOOT COAX CABLE - reaches most jobs. LIGHT WEIGHT HAND UNIT - 2 lbs. 12 oz... . . . .more info
 NEW
$4,000
trans
WorkRite Welder Model 4000  pic    (NW-1-018)     NEW
13 foot coaxial cable. Standard hand unit. Maxium voltage 115 VAC. Maxium current 18 AMPS .Frequency 27.12 M.C. .. . . . .more info
 NEW
$4,600
To Top of Page
    Moulders
Kentwood M509 Moulder (NW-2002) NEW
The Kentwood M509 Moulder is a a serious production moulder! Individual motors on all five spindles deliver generous HP to each spindle to provide production flexibility and high quality cuts. The large cutting circles enable processing of deeper profiles.
Starting under: $42,000
with delivery, installation & training included.

Kentwood M609 Moulder (NW-2003) NEW
The Kentwood M609, 6 spindle moulder is a quality moulder for processing deeper and more intricate profiles. The additional top spindle, as well as the short pad shoe on the first top head, enable more intricate profile processing. Increased HP for each of the individual motors on all six spindles allows deeper profile processing. Automatic bed lubrication reduces operating friction and assures consistent material feeding.
Starting under: $60,000
with delivery, installation & training included
trans
Kentwood Kentwood M609-EL Moulder      
M609EL: This new 6 head moulder configuration is a welcome addition to the KENTWOOD line of machines. Built on the same frame as the popular M609, the M609EL provides the same heavy duty construction in an affordable 6 head machine.
Special Pricing
Starting under: $47,000
Kentwood M609X Moulder (NW-2004) NEW
The Kentwood M609X Moulder is an exceptional machine, designed to produce intricate mouldings in record time. Maximum HP is delivered to each of the individual motors for all six spindles and increased spindle RPMs permit faster feed speeds to produce an excellent finished product. Automatic bed lubrication reduces operating friction and assures consistent material feeding. Special features include a short pad shoe for the first top head, a split rear shoe, and a powered raise and lower of both top heads.
Starting under: $75,000
with delivery, installation & training included.
Nielsen B 130 Profile Grinder       (T-1-013)
203V/ 60Hz/ 3PH. 12” Profile Grinder. As Taken From Service. Can be demonstrated.
$5,500
Oliver SYC-632C Moulder       (SYC-632) pic      
Oliver’s SYC-623 Four Side, Six Spindle Moulder. Used, low hours, S4S Heads included. Ready for shipment.
$40,000
SK1206 6 HEAD MOULDER by SK Machinery - 12" WIDE    (OD-1008) pic   
Condition: Excellent. Year: 2006. Capacity 12", 6 head machine. Some tooling included. Feed motor 10 HP variable 18-78 fpm. 1st spindle bottom 15 HP. 2nd spindle right 15 HP. 3rd spindle left 15 HP. 4th spindle top 25 HP. 5th spindle top 25 HP. 6th spindle bottom 20 HP.
$38,700
To Top of Page
    Panel Saws
Altendorf F45 Series Sliding Table Saw    pic    NEW
For the craftsman who relies on accurate cuts, time and again, the Altendorf F-45 Series machines are the only choice. Available in standard configurations through NC-equipped models. Much more info . . .
Call for
Pricing
gif
Altendorf F-45 SL-3400    pic    (P-4-224)
2003. One owner/operator; in excellent condition. Also available as options for additional fee: -Duplex -Jet Dust Collector 1200 CFM -3 PH Converter.
Call for
Pricing
gif
Altendorf F45 DX DL Panel Saw    pic    (P-4-217)
Year/Cond: 2002 / Very Good. Voltage: 480V/ 3PH / 60 Hz Owner estimated this saw has less then 25 hours total run time. Sliding table with perfected, vertical guidance for accurate, square cuts over the full cutting length. Much more info . . .
$24,000
gif
Altendorf WA8 Series Sliding Table Saw    pic    NEW
For custom shop owners who thought they couldn't afford Altendorf quality, the WA-8 Series provides all the advantages of owning an Altendorf for an exceptional value. Installation not included.
Call for
Pricing
gif
Elcon 185 DSX Vertical Panel Saw (P-4-221) (W)  
2003, Good Condition, Cleaned, Checked. Call us today - 920.452l.4494
$11,995
gif
Giben Beam Saw (GPS_1209)    Call us today - 920.452l.4494
$2,500
Holz-Her 1265 Supercut Vertical Panel Saw with Scoring   pic  (P-4-219) (X)
1987 Model year, Good Condition, still in production with small slider, owner wants to go to full 10' slider. 4HP, 230V, 3PH motor. Approx. 75" x 169" working area. 1 7/8" depth of cut.
$5,995
Holzma Horizontal Beam Panel Saw, HPP 81-3800 Optimat    pic   
Topmatic Plus Control. Cutting length 3800 mm 149.6. Cutting width 3800 mm 149.6. Saw blade exposure 85mm 3.3. Main saw motor 13.5 kW 18 HP. Scoring saw motor 2.2 kW 3 HP. . . .more information . . .
REDUCED!
Call with Offer
HOLZMA HPP 350 - 4200 Panel Saw    pic   
Year:2005. Condition:As taken from service, checked by Holzma tech-fully functional
$52,500
Homag Espana Panel Saw CH 03/38/38 PLUS    pic    (P-4-223)
Condition: Excellent. Year: 2001. Voltage: 230/460/60Hz. Information coming. Call for the details, 920.452.4494.
Call for
Pricing
Lazzari Juno 3000i  10ft. Sliding Panel Saw (P-4-222)(w)    pic   
Very Good Condition, cleaned, checked,. Heavy-duty Tilting Arbor Circular Saw with 10’ Sliding Table and Scoring unit.
$9,995
MartinSliding Table Saw (OD-1015)    pic   
Very Good Condition, cleaned, checked,. Heavy-duty Tilting Arbor Circular Saw with 10’ Sliding Table and Scoring unit.
$24,950
Midwest Automation Counter Top Saw Model 5033 (Q-3-013)  pic    (Q-3-013) 
1985/ ATFS Cleaned and tested. Voltage: 230/460/3PH/ 60Hz. For cutting off or mitering postformed and / or covered tops. 5HP-3400 RPM Main motor .3HP carriage drive motor, variable feed speed from 0-45 FPM with 45 FPM fixed return speed. Stops at 90, 45, 22.5 degrees. Complete with (4) 1.5 HP Router motors for routing the draw bolt mortises, 4 Pneumatic hold downs, standard fence and dust collection hookups.

$12,995
Safety Speed Cut Vertical Panel Saws    pic    NEW Lower Prices
The H-Series offers full-sized vertical panel saw productivity in economical machines. H-Series saws cut within 1/32" on a wide variety of panel materials up to 1¾" thick, and are available in three standard crosscutting widths, 50", 64" and 73". H-Series saws are used in all kinds of panel processing applications.. Much more info . . . .
New-Starting
at $2,179
Safety Speed Cut C4 Panel Saw    pic    (NW-2011)    NEW Lower Prices    
The C4 model packs all of the features of the full-size saws into a portable 5' frame. This panel saw can travel to work sites and fit into shops with limited floor space. The C4 is ideal for cutting 4' × 8' sheets of material. . . . .
New
$1,599
gif
Safety Speed Cut Vertical Panel Saw - H6 Series   pic   (CM-TCS-5)
The H6 Panel Saw offers full-sized vertical panel saw productivity. The H6 cuts within 1/32in. on a wide variety of panel materials up to 1 3/4in. thick. The H6 saws are used in all kinds of panel processing applications. This machine will cross cut panels up to 74in. tall. The H6 comes standard with a 3 1/4 Hp, 15 amp industrial duty saw motor, adjustable vertical and horizontal rulers, spring loaded counter balance system, quick change from vertical to horizontal cutting
$1,300
Saw Trax Compact 5' Wide Panel Saw Varsity Package   pic    (NW-2010)   NEW    
STANDARD EQUIPMENT: Folding stand and wheels, stop, bar and measuring tapes, dual rip gauge, 15 amp Porter Cable saw, 40 tooth carbide saw blade Model C64 is $2,219
 NEW
Model C52 $1,999
Saw Trax 64" Heavy Duty Plus 2000 Series Package    pic    (NW-1017)   NEW
Model 2064. The Full Size Series of Panel Saws are the industry's standard size for handling 8' wide sheets. This frame will fully support a sheet while cross cutting 6 " off one end, or ripping the full sheet. . . . . .
New
$3,659
Schelling Automatic Panel Saw Model FW 430    pic    (P-4-196)
Year/Cond: New 1989, Good conditionATFS Voltage: 480V, 3PH.
165" Cutting Length, 4" height Max, Rear Load, 11Kw Main Motor, 1.5Kw Scoring Saw.
$19,000
To Top of Page
    Rip Saws
trans
Ironwood Straight Line Rip Saw - Model SLR300     pic     (SLR-300)     NEW
The Ironwood SLR-300 is a Straight Line Rip Saw designed to meet the requirements for those who have low to moderate production volumes and do not require gang rip technology.   The SLR-300 Straight Line Rip features solid steel and cast iron construction as well as a manually adjustable infeed fence.   The SLR-300 Straight Line Rip also comes standard with a metal dip-chain feed design with ripping speeds up to 131 fpm.
NEW
Starts Under
$12,000
trans
Ironwood Straight Line Rip Saw - Model SLR305.     pic     (SLR-305)     NEW
The Ironwood SLR-305 is a Straight Line Rip Saw designed to meet the requirements for those who have low to moderate production volumes and do not require gang rip technology. The SLR-305 Straight Line Rip features solid steel and cast iron construction as well as a manually adjustable infeed fence. The SLR-305 Straight Line Rip also comes standard with a metal dip-chain feed design with ripping speeds up to 82 fpm. Three sets of anti-kickback fingers are included for added safety. The machine also comes standard with (6) hold-down rollers for maximum accuracy and precision.
NEW
Starts Under
$14,000
trans
Ironwood Straight Line Rip Saw - Model SLR355.     pic     (SLR-355)     NEW
The Ironwood SLR-305 is a Straight Line Rip Saw designed to meet the requirements for those who have low to moderate production volumes and do not require gang rip technology. Three sets of anti-kickback fingers, (8) hold-down rollers, and side protection guard to ensure maximum operator safety. The machine also comes standard with (8) hold-down rollers for maximum accuracy and precision.
NEW
Starts Under
$21,000
Kentwood R220 and R320 Multi-Rip Saws NEW
The Kentwood Professional Fixed Blade Series is tailored to meet requirements from low to moderate production volumes. Offering multiple options, the Professional Series of fixed arbor rip saws includes the R220, capable of cutting widths up to 10" wide and the R320, which can cut 12" wide material. Whatever your requirements, JGW Co. Inc, offers a Kentwood multi-rip saw to meet your needs. Features: • Dip chain feed • Saw blades • Blade spacers • Manual oil pump
Call for
Pricing
920.452.4494
Kentwood R320 M, Multi-Rip Saw with Movable blade NEW
The Kentwood Advanced Series is tailored to meet requirements from low to moderate production volumes. The Advanced Series of moving blade multi-rip saws includes the R320 M with one or two heavy-duty blades.Features: • Dip chain feed • Red lasers for blade position indication (power 15 mw maximum range 6m) • Optimization with manual override options • Automatic oil pump • Sound reduction enclosure for quiet running • Control panel for cut list with up to 99 programs (manual or automatic control).
Call for
Pricing
920.452.4494

Kentwood Multi Rip Ancillary Systemsr NEW
To help successfully optimize the use of all material, Stiles Machinery offers a quality line of ancillary equipment--including infeed and outfeed systems, with both rip optimization and laser alignment. Features: • Motorized servo fence and driven roller infeed • Pneumatic stabilizing alignment arms • Laser blade position indication
Call for
Pricing
920.452.4494
FP Industries Green Light Laser Green Light Laser
FP Industries has designed the Green Light Laser, which is highly visible in all lighting conditions. It has 8 times the brightness of an equivalent red laser. Call us, 920.452.4494 for more Info or PDF format, or : MMG Series    MLG Series
Lobo 12" SINGLE RIP SAW Model TRS-0012    pic    (NW-1010)   ON SALE
NEW Hard chrome plated, heavy-duty cast iron table for maximum wear resistance. Precision fence assures absolute accuracy between blade & fence, the rail is equipped with a measuring rule. Double anti-kickback fingers mounted at the infeed end providing maximum safety protection to the operator. Heavy duty industrial motor for powerful cutting capacity. Ruggedly constructed sheet metal frames for durability and long usage. The variable feed speed enables the machine to meet different production requirements .MUCH more . . . . .
ON SALE
$7,890
Lobo 14" MULTI- RIP SAW Model TRS-2114    pic    (NW-TR2114)
NEW Precision fence assures absolute accuracy between blade & fence, equipped with measuring ruler gauge.
Double anti-kickback fingers mounted at the infeed side provided maximum safety protection.MUCH more . . . . .
NEW
$20,990
Lobo 16" SINGLE RIP SAW Model TRS-0016    pic   
NEW Precision fence assures absolute accuracy between blade & fence, rail is equipped with measuring rule. Double anti-kickback fingers mounted at the infeed end provided maximum safety protection to the operator. Heavy duty industrial motor for powerfull cutting capacity. Ruggedly constructed cast iron frame for durability and long usage. The variable feed speed enables the machine to meet different production requirements. V-way track and chain block surface are heat-treated for long wear resistance. MUCH MORE . . . .
ON SALE
$9,390
Marion Rip Saw Model "M"    pic    (O-2-028)
S/N 152174 15 HP, 220V, 3PH, 60Hz. Condition: Good, ATFS. Newer Chain. 14" Maximum Blade capacity. 1 1/2" diameter arbor. 4" maximum depth of cut. 13" Minimum stock length. 24" Maximum rip capacity to the right of the blade. 80" x 65" table size. 1.5 HP variable feed speed. Overhead holddown with 3 front and 3 back pressure rolls.
Alot of Saw for the money!!! Price was: $4,500.
Sale Price
$3,995
Mattison 202 Rip Saw    pic    (0-2-034) (W)
Reconditioned 2008 - Saw is in great condition for its age.  No current broken castings (One old brazing in the "part drop-off" casting). No missing doors, No holes drilled in the table, even has an obsolete saw sharpening attachment for all steel blades!  Saw is currently being thoroughy cleaned, checked, repaired, and painted. 10HP, 220/440V. Overall solid machine. 2HP, 220/440V Feed chain motor with feed speeds of appox. 50-180 FPM . . . much more info . . .
See Listing
For Specifics
gif
Oliver 12 " Econo-Line Rip Saw    pic      NEW  
Model OM-4910 Can be viewed in our warehouse.
7.5 HP, 1 PH or 10 HP, 3 PH motor. Pivoting control panel. Precision cast iron quick  micro-adjustable rip fence.
Three Sets of Anti-Kickback Fingers. 6' glue line. Variable speed chain feed. 
NEW
$10,950
Oliver 12" Straight Line Rip Saw    pic     NEW - In Stock
Model OM-4925 Can be viewed in our warehouse.
15 HP, 3 PH motor. Pivoting control panel. Precision cast iron quick  micro-adjustable rip fence.
Two Sets of Anti-Kickback Fingers. 10' glue line. Variable speed chain feed.
NEW-In Stock
$15,950
To Top of Page
    Routers - CNCs    Many Used CR Onsrud, Komo, Andi, etc...Available!
tran
Auto Rout CNC Router    pic    (L-1-191)
1994/ As Taken From Service Voltage: 230V, 4x8 Flat Table, (1) 3 HP Router , Vac Pump. Call for additional details.
$18,950
Busellato 4447 Optima CNC Machining Center    pic    (L-1-209)
1999 Model year, Serial 2666B As Is, As removed from service, will need repair or rebuilding.
Call for
Pricing
CAM TECH RM2 - Single Head CNC Router    pic    (OD-1007)
Condition: Good. Year: 2006. Capacity 52" x 102". CMC4 Controller. With control computer. Monitor. Keyboard. HSD 7 HP spindle (3-phase) bracket.
$25,000
CR Onsrud / 3025 Inverted Pin Router    pic    (L-1-174)
Year/Cond: 1999 / Very Good Condition, Low Usage S/N 30990702 Voltage: 230V, 3Ph, 60Hz Description: 30" throat capacity, 5HP V Belt drive motor, 20,000 RPM Heavy Duty spindle with oil mist lubrication, 0-3" spindle travel, pneumatically controlled by foot pedal, 3 position depth stop. This machine will include the vacuum temp plate holder ($1,000.00 option).
Call for details 920-452-4494
$6,500
EMA Pin Router Model R32     pic     (L-1-201 )
1979/ ATFS Cleaned and Tested. Voltage: 440/3PH/60Hz. 3.6/5.4 HP Two speed motor, Belt driven, Table Dimensions 31.5x39.5”. 32” throat Depth, 6 Stop Depths, Spindle Max Depth 4”.
$1,495
GANNOMAT S2 RTA - BORING AND CAM LOCK INSERTER     pic     (OD-1010)
Year/Cond: 2006, Good condition. Capacity fully automatic twin head drilling and insertion machine for RTA fittings. Working width 180 mm to 800 mm. Drilling head equipped with 2 spindles located along the Y-axis on linear bearing guide ways.
$24,500
Heian SR-431 PF CNC Router     pic     ( L-1-198 ) (W)
Year/Cond: 2002 / Good Condition. Voltage: 460/3PH/60Hz. Table Size is 5x10 ’ . Dual Zone Vacuum. Four Single Spindle Heads each w/ single piggy-back drill. Please call for additional information.
$150,000.
Best Offer
pic
Holzher Masterwood Project 320     pic     (L-1-205)
Many pictures to view. Information will be posted soon.
$21,900.
pic
Holzher Speedy 207 Point to Point Router     pic     (L-1-199)
1995 / Good ATFS. Voltage: 220V/ 3Ph/ 60Hz. 54x29 Working area with mirror image stop, 2800mm long panels can be processed, 50mm Max thickness, 60mm Z stroke. Four (4) movable panel supports each with (2) vacuum cups.
$9,000.
pic
MultiCam MG305 CNC Router    pic   (CM-1003)
Year 2004, Good condition. Capacity Resolution .0001 ". Repeatability +/- .002 ". Max. cutting speed 1200 IPM. Max. rapid traverse 2200 IPM. Process area (X x Y) 80 " x 145".
$50,000
2008 OMAL ( HBD-1300 ) HORIZONTAL BORE, GLUE AND DOWEL MACHINE    pic    (OD-1012)
2008. Numerically controlled. Four loading zones. Single drill. Piggy back glue and dowel insertion unit. STD set up for 8mm dowels. Loading zone selection executed by CNC. More information.
$42,500
Onsrud Overhead Pin Router    pic    (L-1-207) (W)
Model A-1136A -26 x 36 cast iron, non-tilting table - 5HP 220V, 3PH motor. -Serial 9778 -36" throat capacity -2 spindle speeds 10,000 and 20,000 RPM oil mist lubrication
$2,495
Onsrud Overhead Pin Router    pic    (L-1-208) (W)
Model W-1036A. Cleaned, Checked, good condition.   3 x 4 foot table. 5 HP, 220V, 3PH motor. 36 " throat capacity. 2 spindle speeds 10,000 and 20,000 RPM oil mist lubrication.
$2,495
Saw Trax Universal Saw and Router Table    pic    (NW-2013)- NEW
Over 30" cross cut Over 30" cross dado. Uses Unique Dust Buster Fence System™ to eliminate saw dust misalignment. Adjustable fence system . . . .more info
NEW
$945.25
Tool Not Included
Saw Trax Floating Router Table    pic    (NW-2014)- NEW
This machine is best used for cross routing straight lines, blind dados or as an overhead router table. It has two different bearing systems . . . .more info
NEW
$1,329
trans
Schmalz Vacuum Pads/ Pods    pic   
Find the Schlmalz Pods, pads, plates, etc. that you need for your CNC. Call to order. 920.452.4494
See pricing
on Forms
trans
SCMI R8, Manual Overhead / Pin Router    pic    (L-1-200)
Good Cond. Cleaned, Checked, Run - does need new brake shoe for hand brake. 6.6HP, 230V, 3PH motor drives spindle at either 10,000 or 20,000 RPM. 1/4" to 5/8" collet size.
$1,495
trans
SCMI R9A Overhead Router   pic    (L-1-192)
Year/Cond: As Taken from Service. Voltage: 460V. Call for more information. 920-452-4494.
Call for
Pricing
trans
Shoda NC 516, 1320 Router   pic    (L-1-193)
Year: 1987. Voltage: 460V. Call for more information. 920-452-4494.
Call for
Pricing
trans
Shoda CNC Router / NC516-1326     pic     (L-1-102)
Year/Cond: 1987/ ATFS. Voltage: 460V/3PH/60Hz. 102x51 ” moving table, stationary bridge. (4) 12 HP(6.5kw) wrench type routing pindles. (2) 1 HP Piggly back drills. More information available.
$25,000
trans
Thermwood Router Model 53   pic    (L-1-210)
1995. Moving gantry machine, 5'x10' table ,10 hp spindle,   5 hp piggy back spindle,   2 hp piggy back spindle and a   drill bank .
$29,950
trans
Weeke BP 145 Optimat Point to Point Router   pic    (BP145)
Y-Axis 1890mm (75") Z-Axis 400mm (16 ") . Eight(8) movable support rail & pod fixturing system . Two(2) High speed liquid cooled router spindles . Equipped with eight(8) position tool changer .
$87,000
To Top of Page
    Sanders
CEMCO Widebelt Sander   pic    (CM-TCS)  
FOUR HEAD 60" WIDE BELT SANDER. Model URRFF-103. First head steel-50 hp motor 10" contact drum. Second head rubber-50 hp motor 8 1/2 contact drum. Third and fourth heads-5 3/8 finish rollers. Instruction maual included. Serial number WBS-495. ASSEMBLY CARD 9733 8/14/86.
Call for
Pricing
Conquest 20" Disc Sander & Grinder   pic    (DG201)  
Equipped With a Dayton " On-Off " Reversing Switch. Finely Machined & Dynamically Balanced Aluminum Grinding Disc for Vibration Free Operation and Elimination of Disc " Fly Off " . Used for Metal, Wood, Fiberglass and Plastic.
$1,895
Conquest Combo Disc / Belt Sander & Grinder     pic     (DB301)    
Each Table Tilts Up/Down. 2002. Voltage: 230/3PH/60Hz
$6,500
Costa 3 Head 53 " Widebelt Sander     pic     (M-1-101) (W)     For Rebuilding Only
Model 70 CCT 1350 1989, Serial CL89120 440V Motors Working Width 53 " Abrasive Belt Size 54 " x 103 " . Minimum Working Thickness 1/8 " . Maximum Working Thickness 6 1/4 " . Working Height approx. 29 " - 35 " . As is, where is. Parts or rebuilding only.
$5,000
Denray Down Draft Table     pic     (DD-2872)
Model 2872 features the new tube filtration system, which cleans with a 99% capture rate at 1 micron. These tables are very popular with the small to medium sized shops.
Call For
Pricing
Doucet PMC 264 Stroke Sander    pic    (MC-2-009)
Year 2002. Voltage: 230/3PH/60Hz
$6,500
G & P Drum Sander    pic    (CM-TCS-3)
Model O-6080 3 Hp, 480 volt motor. Belt and drum. TurboSand head.
$1,900
picpic
Haney Orbital Sander     pic     (N-3-021)
37" wide, 2 Head.Approimately 1991, SN 073s. Priced for immediate sale. Low Hours!! Guaranteed to be in good operating condition. Additional information available.
$9,950
HEESEMANN MFA-8/3 52 " Wide Belt Sander     pic     (M-1-104)
Year/Cond.:2000 ... Excellent condition Elect./Voltage:460 V, 60 Cy, 3 Ph. Description:3-Head, 52 " working width; equipped with: (1) Cross belt, (2) Platens and (1) Rotary brush, . . . more information . . .
$99,500
HEESEMANN MFA-8 Wide Belt Sander     pic     (M-1-105)
1995 / Good condition. Voltage: 460V/60Hz/ 3PH. Veneer/ Sealer Sanding Wide Belt. • Head 1 Segmented polishing platen, 5/8 wide segments CSD Control, variable speed abrasive belt with inverter RPM control 15HP motor • Head 2 (Brush Type head with composite/dense fiber loading Variable rpm with inverter control, 5HP motor...
$55,000
gifgif
HEESEMANN Sanders    
3 head and 4 head Heeseman Sanders coming in, . . . Call 920.452.4494 for details
 
Lobo Brush and Pnuematic Drum Sander    pic   NEW (NW-901)    
Model No: FL-901 Excellent for sanding curves and edges. Double-ended spindle accomodates two different heads.The pneumatic drum can be filled with varied amounts of air pressure to obtain different sanding abilities. More Info available.
NEW
$459
Lobo WS-A3775 Wide Belt Sander    pic   NEW (NW-2005)     
37" x 75" WIDE BELT SANDER. Rugged heavy-duty sheet metal construction design for durability and stability.  Full power industrial motors drive sanding and auto infeed belts smoothly. Infeed and outfeed are spring loaded with hold down rollers to ensure positive feeding without sanding marks. More Info . . .
NEW
$12,990
trantran
Locatelli ORT 1200 Turning Sander    pic    (N-3-020)
Year/Cond: Unknown. Voltage: 460V, 3Ph. Chucking Capacity 54”, Six spindle two stage sanding rack, Two overhead ribbon sander, 1.5 HP each, Hopper Feed, Spindle drive 3HP, Hydraulic pump motor 1.5 HP
$5,000
Meber LEM Stroke Sander    pic   
Year/Cond: 2002. Voltage: 230/3PH/60Hz.
$6,500
QuickWood Classic 1300 Cup Sander    pic   
The new QuickWood Classic 1300 and 900 is a cup brush sander. Click Here for More Details
Call for
Pricing!
Safety Speed Cut Wide Belt Sander: 3760    pic    (NW-2012)  NEW
The 3760 is a serious wide belt sander for the small woodworking shop. This machine packs most of the features of our larger sanders into a lower cost machine. The 3760 is available with a 10 Hp single phase or 15 Hp three phase motor.Where else can you get a high quality American Made wide belt sander for under $10,000? Ships for ONLY $249
NEW
$9,400
Sheng Shing Wide Belt Sander    pic    (M-1-108)
Year: 1987. Voltage: 440V, 3 PH, 60HZ. Model 37” Single Head Combination Drum/Platen. ProScale digital display for height adjustment. 2 extra platens. Pneumatic belt and conveyor tracking . 30+ belts in various grit. Ready to run!
$4,000
gif
SuperMax Tools Brush Sander    pic   NEW
SuperBrush Applications include but are not limited to: white wood sanding, de-nibbing, sealer sanding, primer sanding, UV roughing, metal graining/straight lining, metal de-burring, sanding/polishing solid surface material, scuff sanding, shutter sanding, de-glossing and de-stressing. . . . more info . . .
Starting at
$4,000 NEW
gif
SuperMax Tools Single and Double Drum Sanders    pic   NEW
Continuous-duty 5HP motor, 208- 230 Volt power. SandSmart™ automatic control of the infinite-variable feed rate (0-15 ft./min.) for the conveyor gives a perfect finish. Multiple grit sanding in single pass with double drum models. . . more info . . .
Starting at
$3,600 NEW
Timesavers 2HD Widebelt Sander    pic    (M-1-109) (W)
1992. Item has been cleaned, checked. 230/460 motors currently wired for 460V. 2 Head, 36 " width capacity. 1st head: 25HP belted motor drives the 6 " Diameter rubber covered contact roll. 2nd head: 15HP belted motor drives combination head with 2 rolls and a 2 1/2 " wide finishing platen. 37 " x 60" belt capacity. Posi-Trak electronic belt.
$9,999
Timesaver 252 30 BIC Widebelt Sander    pic   
1995. 30 HP, orbital 7 1/2 HP, brush 3 HP - 3 units, 1500 hours
Call for
Pricing
WIGO 1095 Two Sided Profile Shaper/Sander    pic    (R-1-006)
Year/Cond: 1983 ATFS Voltage: 440 3 Phase. 8 head (four on each side): (2) 10 Hp - 9,000 RPM spindles, (2) 7.5 Hp variable speed from 9,000 to 18,000 rpm; shaping units with interior tapered MK-3 spindles, (2) 5 Hp from 1,500 to 3,000 rpm belt sanding/profile sanding units; spacing between unites #3 & 5 to fascilitate tool change.
$25,000
Make an offer!
To Top of Page
    Saw - Industrial
Crosscut Solutions CS14M & CS18M Mechanical Cut-Off Saws pic    (CSI)
Made in the USA. 2 "x8", 2"x12" and optional 4"x8" cutting capacities available. Extremely fast standard speeds of approximately 133 cycles/minute with speeds available up to 211 cycles/minute. 7.5 HP TEFC motor is standard. 230/460/3 PH/ 60 cycle. Heavy duty hold down. CLICK HERE to read more information -PDF format.
Call for
Pricing
Crosscut Solutions CS14P & CS18P Pneumatic Cut-Off Saws pic    (CSI)
Made in the USA. 2"x8", 2"x12" and optional 4"x8" cutting capacities available. Quality pneumatic cylinder - top and bottom pneumatic cylinder cushions for a smooth operation plus a large rod diameter for years of dependable service Easily adjustable cycle speeds - speeds up to 90 strokes per minute.Electrical foot switch, solenoid valve and reed switches replace air compnents to increase reliability while decreasing air consumption and maintenance costs. CLICK HERE to read more information -PDF format.
Call for
Pricing
Rockwell / Delta 20" Wood or Metal Bandsaw pic    (Q-1-057)
Model 28-365. Cleaned, Checked, Good condition for age. The maximum height of cut is approx. 12 ". The throat clearance is approx. 20". 1/2 HP, 230/460 volt, 3 phase, wired 230 volt. Variable speeds accomplished by different belts and pulleys off of motor.
$1,395
Delta 10" Unisaw - Cabinet Table Saw pic    (O-1-056)
Rockwell Delta Model 34-466, Used, Good working saw. Saw has been cleaned, checked. 10" blade capacity 3HP, 3PH, 230V belted drive motor spins arbor at approx. 4000 RPM. Biesemeyer 75 " fence and rails system is included
$1,195
Evans Ezy Mitre 710 Counter Top Saw pic    (Q-3-012)
2006/ Excellent Condition, Very Low Hours. Voltage: 230V, 3Ph, 60 Hz. For cutting off or mitering post formed tops; Miters via precision grooves set in phenolic table top; mounted on a 60” x 96” table, 35-1/2 working height. More Information available.
$9,000
Fortis 32" Resaw pic    (Q-2-007) (X)
Approx. 1994, Excellent condition, installed new and used very little. Model FR-800 10HP, 230/460V motor, 3PH Maximum throat clearance without the fence 27.5" . . . .more information . . . .
$5,995
Lobo CS-18L, 10HP Pneumatic Cut-Off Saw    pic    (NW-1012) NEW
Semi-automatic machine Automatic cutting cycle operated by foot switch. Sealed long life ball bearings. Powerful 10 HP motor for heavy-duty cutting capacity. Precision ground cast iron table with heavy metal cabinet stand. Easy, versatile operation for furniture, lumber, door, pallet or other manufacturing. Clamp and guard automatically hold the lumber during cutting cycle and release it after cutting. Saw blade rises from under the table and returns after completing cutting cycle for safe operation. Magnetic control with over-load protection.
NEW
$3,199
Lobo 12" RS-612 Radial Arm Saw  pic    (NW-612)  NEW
Laser light shows straight cut line. Rail is treated, hardened, and precision ground for maximum wear resistance and slide accuracy. Saw head runs on ball bearings which provide effortless and . . . . .more information . . . .
NEW
$1,590
Lobo 14" RS-640 Radial Arm Saw  pic    (NW-640)  NEW
High performance self-braking motor for safety protection. Quick positions stop at 45º, right and left. Saw head is firmly locked at any angle desired. Safety bladeguard. . . . .more information . . . .
NEW
$2,390
Midwest Automation Counter Top Saw Model 5033 (Q-3-013)  pic    (Q-3-013) 
1985/ ATFS Cleaned and tested. Voltage: 230/460/3PH/ 60Hz. For cutting off or mitering postformed and / or covered tops. 5HP-3400 RPM Main motor .3HP carriage drive motor, variable feed speed from 0-45 FPM with 45 FPM fixed return speed. Stops at 90, 45, 22.5 degrees. Complete with (4) 1.5 HP Router motors for routing the draw bolt mortises, 4 Pneumatic hold downs, standard fence and dust collection hookups.

$12,995
Oliver 20" Band saw Model OM 4640   pic    NEW
Model OM4640 Can be viewed in our warehouse.
Large cast iron table with T-slot miter gauge. 1.25" Max. blade width. Emergency stop foot brake. Heavy gauge steel frame . . . more info . .
NEW
Only $3,525
gif
Oliver 18" Cut-off Saw   pic    NEW  INSTOCK
Model OM5025 Can be viewed or demonstrated in our warehouse. 7.5 HP, 1 Ph or 3 Ph motor. Full coverage guards. Easily adjustable workpiece clamp height.. Cast iron fence and table. Adjustable cutting cycle. Easy blade access. Conveniently located controls and foot pedal.
NEW -Instock
$4,450
gif
Original Saw Contractor Saw   pic     
Model 3512-03. 3 HP, 3 PH. Automatic blade braking system 24” crosscut standard on all machines in series Precision carriage riding on 4 tight tolerance convex bearings mounted horizontally. Oversized MDF table top. Powder coated heavy gage steel frame and legs. Metal Cutting saws also available.
$3,614
gif
Original Saw Heavy Duty Saw   pic       
Model 3531-03. From the flat bottom induction motor to its heavy cast iron arm, throughout its heavy gauge-steel powder coated frame and legs, to its oversized table top: the Heavy Duty Series radial arm saws say quality, repeatability, accuracy, and value. Metal Cutting saws also available.
$5,363
gif
Original Saw Super-Duty Saw   pic    
Model 3551. The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day,and able to do a wide variety of cutoff and dado operations. These massive 850 poundmachines are constructed of cast and ductile iron for vibration free operation. The new models in the series, the 3554 & 3559 now have the deepest cutoff capability in their class with the new larger 22” blade capacity. Metal Cutting saws also available.
$8,159
gif
Pistorious Chop Saw   pic     (CM-TCS-5)
MODEL SC.  Good condition. 16" blade. Pnuematic operation. 240 Volt.
$1,900
gif
Pistorius MN200 Double Miter Saw    pic (P-3-011) 
Year/Cond: 1999 ATFS. Voltage: 230V/60/3Ph. 2 5/8” Max Height capacity, 3 5/16 max width capacity, (2) 1.5 HP 3450 RPM motors, 12” diameter blades non staggered, 5/8” Diameter arbor, belt driven saw arbor, air actuated with foot pedal operation, (2) Vertical hold down cylinders.
$6,250
gif
Sawstop Contractors Saw    pic    NEW       
How Does It Work? Take a Look Inside!   Click Here for Video

SawStop® Safety System 10" blade stops and retracts on accidental contact. 30" aluminum extrusion fence and rail system. 36" or 52" Professional T-Glide fence, rail & extention table options available. Large start/stop paddle for hands-free shut off. Powerful 3HP motor. . . . . much more!!
NEW
In Stock
Starting at
$1,599
Sawstop Table Saw 3 HP    pic    NEW      
  How Does It Work? Take a Look Inside!   Click Here for Video
SawStop® Safety System 10" blade stops and retracts on accidental contact. European style riving knife to minimize kickback. Low profile blade guard for narrow cuts. Large start/stop paddle for hands-free shut off. Magnetic contactor motor control. Extra heavy castings. Widely spaced trunnions. Cast iron extension wings. Vertical slide blade elevation for increasedstability. Powerful 3HP motor. . . . . much more!!
NEW
In Stock
$3,099
Freight NOT Included to JGW Warehouse
Drop Fee May Apply
Sawstop Table Saw 5 HP    pic    NEW       
  How Does It Work? Take a Look Inside!   Click Here for Video
SawStop® Safety System 10" blade stops and retracts on accidental contact. European style riving knife to minimize kickback. Low profile blade guard for narrow cuts. Large start/stop paddle for hands-free shut off. Magnetic contactor motor control. Extra heavy castings. Widely spaced trunnions. Cast iron extension wings. Vertical slide blade elevation for increasedstability. Powerful 5 HP motor. . . . . much more!!

NEW
In Stock
$3,399
Freight NOT Included to JGW Warehouse
Drop Fee May Apply

Sawstop Table Saw 7.5 HP    pic    NEW      
   How Does It Work? Take a Look Inside!   Click Here for Video
SawStop ® Safety System 10 " blade stops and retracts on accidental contact. European style riving knife to minimize kickback. Low profile blade guard for narrow cuts. Large start/stop paddle for hands-free shut off. Magnetic contactor motor control. Extra heavy castings. Widely spaced trunnions. Cast iron extension wings. Vertical slide blade elevation for increasedstability. Powerful 7.5 HP motor. . . . . much more!!

NEW
In Stock
$3,899
Freight NOT Included to JGW Warehouse
Drop Fee May Apply

trans
Tannewitz G3H 36 Inch Band Saw     pic       (Q-1-026) (W)
Approx. Early 1950's vintage, Serial 10149 Cleaned, Checked, Very Good condition for age. No noticable cracks etc. in castings. 36" Wheel Dia. The maximum height of cut is approx. 20". The throat clearance is approx. 35.5". 5 HP, 230/460 volt, 3 phase, wired 460 volt. Approx. 8,000 FPM blade speed.
$4,995
trans
Tannewitz XJS Sliding Table Saw     pic       (O-1-054)(w)
Serial 74234. Cleaned checked, runs smooth and quiet. Missing part of rack and pinion fence. A Biesemeyer fence would bolt up nicely though. Original guard is also missing. One locking handle on the two miter guages is mssing. Dust chute access door is present. 16" blade capacity saw with 7.5 hp direct drive 220/440 60 cyc. 3 phase. 1 " Arbor spindle.
$1,999
trans
Tannewitz XJ - "Q" Table Saw     pic       (O-1-052)(w)
Still in production, current owner bought the saw rebuilt by dealer 16" saw with 5 hp direct drive 220/240 60 cyc. 3 phase. 1" arbor spindle. Table size 48" deep x 38" wide, 33 " high. Right tilt, front handwheels. Depth of cut, 4 & 1/2". Biesemeyer 32" Fence and rails.
$3,495
trans
Whirlwind Up-Cut Saw    pic      NEW
The Whirlwind Up-Cut Saws are now manufactured by CTD and are enhanced and upgraded. More information . . .
Starting at
$4,395
To Top of Page
    Shapers, Planers, Jointers
Beach 7.5HP Shaper   pic    (R-2-059)  
7.5HP, 220/440V, 3PH motor. 1.25" spindle size. Approx. 4+ inches under the nut. Good Condition. One owner since new in approx. 1978.

$2,595
gif
Delta 20" 4-knife Planer   pic   (J-1-031) (W)
Model RC-51 20" x 9" capacity. Heavy duty cast iron and rolled steel frame on steel base. 7.5HP main motor 208-220/440V, wired for 220V. 4 knife round cutterhead. 4 jackscrews support bed. . More information is available.

$2,395
INVICTA 12" JOINTER    pic    (NW-929D) NEW
MODEL DI-32. 3 HP, 230V, 1Ph Motor. 5 HP, 230/460V 3Ph Motor. Magnetic Starter with Overload Protection. Cast Iron Frame Precision. Ground Cast Iron Table. Three Knife Cutterhead. Rear Cuttrhead Guard. More Info . . .
NEW
$3,790
INVICTA - TI-14 V.02 SINGLE SPINDLE SHAPER    pic    NEW
7-1/2 HP 3-phase motor; cast iron frame; CNC precision ground cast iron table; 35-1/4" x 43-3/16" fixed table; spindle stroke 5-1/2"; 1-1/4" and ¾" diameter spindles; 5-5/16" capacity under the nut (1-1/4" spindle only); (4) spindle speeds of 3,000, 6,000, 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes spindle reversing switch, brake, micro adjustable fence, thermal overload protection, dust hood and miter gauge. Machine shipping weight is 1,425 lbs.
NEW
$4,990
INVICTA - TI-14 V.03 TILT SPINDLE SHAPER    pic    NEW
7-1/2 HP 3-Phase motor; spindle tilt -5° to +45°; cast iron frame; 35-1/4" x 43-3/16" CNC precision ground cast iron fixed table; spindle stroke 5-1/2"; 1-1/4" and 3/4" diameter spindles; 5-5/16" capacity under the nut (1-1/4" spindle only); (4) spindle speeds of 3000, 6000, 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes: Spindle reversing switch, 3/4" and 1-1/4" spindles; safety brake, micro adjustable fence, magnetic starter with overload protection, dust hood and miter gauge. Machine shipping weight is 1,433 lbs.
NEW
$5,990
INVICTA - TI-14 V.04 SLIDING TABLE SHAPER    pic    NEW
7-1/2 HP 3-phase motor; cast iron frame; 25-1/4" x 43-3/8" CNC precision ground cast iron fixed table; 10-7/8" x 43-1/4" sliding table; coping table with manual eccentric hold-down clamp and 58" long fence with flip-over stop; spindle stroke 5-1/2"; 1-1/4" and 3/4" diameter spindles; 5-5/16" capacity under the nut (1-1/4" spindle only); (4) spindle speeds: of 3000; 6,000; 8,000 and 10,000 RPM; 13-3/4" maximum table insert diameter; (2) 4-3/4" dust outlets. Includes: Spindle reversing switch, safety brake, micro adjustable fence, magnetic starter with overload protection, dust hood and miter gauge. Machine shipping weight is 1,566 lbs.
NEW
$6,190
KufoTilting Spindle Shaper   pic   (NW-203)  NEW
Model SK-28SP. Spindle tilts to 30° for shaping various patterns. Three spindle sppeds by changing belt location on pulley. Spindle lock for easy spindle change. Large handwheels for adjusting spindle with locking knobs . . . more information . . .
Model SK-28901 - Optional Sliding Table with 31" rail - Also available
Call for
Pricing
Kufo 12" Jointer w/Spiral Head, 74" Bed 3HP, 1PH    pic    (NW-929B) NEW
Cast iron body and precision ground table. 2 belt drive mechanism. Large table size for more working area. Two side hand wheels for individual table adjustment ensure accurate cutting. Much more info . . . .
Call for
Pricing
Lobo 8" Jointer Model JT 0008    pic    (F-1-010) (w)
NEW with WARRANTY Can be viewed or demonstrated in our warehouse.
230V, 3 Phase, 2HP. Large cast iron fence with quick lock easily adjustable in any position up to 45 degree. Independent tables easily adjust by hand wheels under the each side of beds. Comfortable working height and very stable construction. Front scale for easily reading depth of cut.Heavy metal cabinets stand Precision ground cast iron table. . . . .much more . .
NEW
$869
Lobo 12" Jointer Model JT 0012    pic    (NW-JT-0012)    NEW
Cast iron body and precision ground table. 3 Belt drive mechanism. Large table size for more working area. Two side hand wheels individually adjust each side of table, easily for accurate cutting. . . . . .much more . . . .
NEW
$2,290
Lobo 16" Jointer Model JT 0016    pic    (NW-JT-0012)    NEW - ON SALE
Cast iron body and precision ground table. 3 Belt drive mechanism. Large table size for more working area. Two side hand wheels individually adjust each side of table, easily for accurate cutting. . . . . .much more . . . .
NEW
$2,590
Lobo Machinery 20" and 24" Heavy Duty Planers    pic    (NW-2015)    NEW  IN STOCK
Heavy cast iron one-piece frame and base. Easy and accurate assembly of the knives. High quality for long period of use. Top rollers for returning stock. Table raises and lowers easily. Gear driven feed rollers for trouble free feeding . . . .more info. . .
NEW 20"
ON SALE
$2,590
NEW 24"
$3,390 IN STOCK
Lobo 1-1/4"  Heavy  Duty Industrial Shaper    pic    (NW-2006)    NEW  IN STOCK
MODEL SP-475. Designed for heavy industrial work. Industrial full power motor for maximum cutting ability. Precision ground large cast iron table. Three spindle speeds for versatile cutting. Sealed long life ball bearings. Heavy sheet metal cabinet base for durability and stability. Magnetic control for overload protection. Quick-change spindles. Individual two-side micro-adjustable fence. Emergency foot brake, spring hold-downs.
NEW
$3,190
IN STOCK
LOBO 1 1/4" Shaper with Sliding Table   pic   (NW-204)  NEW
Model SP-145. Designed for heavy industrial work. Industrial full power motor for maximum cutting capacity. Precision ground 33-1/2” x 27-1/2” cast iron table. Three spindle speeds for versatile cutting. More info . . .
NEW
$3,390
gif
Neuman No 600 Finish Planer - Top Only    pic     (J-1-032) (w)
Year/Cond: ATFS Checked and Tested. Voltage: 230V/60Hz/3PH. 24 ”x8 ” Planer, 5 HP, Push Button Starter with overload protection, 3 knife head, variable feed speed.
$5,200
gif
Oliver 10" Jointer Model OM4240    pic    NEW-Instock
Powerful 3 HP, 1 Ph or 5 HP, 3 Ph Baldor motor. Precision ground table. Wide, solid cast iron base for vibration free operation and stability. More info . . . . . .
NEW-Instock
$2,650
Oliver 22 " Planer Model OM4455    pic    NEW-Instock
Four knife cutterhead.Segmented infeed roller and sectional chip breaker. Digital thickness controller and Powerful 7.5 HP, 1 Ph or 10 HP, 3 Ph motor. Two feed speeds: 20 and 30 FPM. More info . . .
NEW -Instock 
$5,965
Oliver 25" Planer Model OM4470.    pic    NEW
Four knife cutterhead.Segmented infeed roller and sectional chip breaker. Digital thickness controller and up/down powered table travel. Three feed speeds: 20, 25 and 30 FPM. Powerful 10 HP, 1 Ph or 15 HP, 3 Ph motor. Double outfeed rollers.
NEW  
$9,050.
Profilematic Double-sided Shaper-Sander (R-4-004) (X)    pic   
Model EZ-756, year: 1998. Condition: Rebuilt in 2003, never put into service after rebuild. $11,000 rebuild included new heavy-duty drive shafts and bearings, new shaper bearings, and rack-and-pinion opening mechanism for tighter tolerances, and new motor to power the adjustment of the opening and sizing of the machine. Digital Accutrack sizing scale recommended. Floor space required: Machine is approx. 13’ L x 14’ W with the sanders adjusted fully horizontal. CFM required: 1,000-2,000 depending on use of all stations at the same time. Power: 220 volts, 3PH. Maximum work piece width: 60” . Feed speed: fully adjustable potentiometer from 0-65 fpm. Price new: $120,000.
$10,000
or Offer
Sunhill CT-102 Two Speed Spindle Shaper    pic    (NW-1001)
Model CT-102 NEW Powerful TEFC induction motor with magnetic switch. 2-speeds; 7,000 & 10,000 rpm’s; reversible. Interchangeable spindles ride on high speed bearings. Accommodates up to 6-1/4” cutter. T-slot mitre gauge. Integrated dust port. Available spindle sizes: 1/2”, 3/4”, 1”, 1-1/4”. Available collet sizes: 1/2” 1/4”. Optional sliding table. Optional HTC mobile base. Regular Price $1,439
New
$1,395 - Sale
WIGO 1095 Two sided Profile Shaper/Sander    pic    (R-1-006)
Year/Cond: 1983 ATFS Voltage: 440 3 Phase. 8 head (four on each side): (2) 10 Hp - 9,000 RPM spindles, (2) 7.5 Hp variable speed from 9,000 to 18,000 rpm; shaping units with interior tapered MK-3 spindles, (2) 5 Hp from 1,500 to 3,000 rpm belt sanding/profile sanding units; spacing between unites #3 & 5 to fascilitate tool change.
$25,000
Make an offer!
Yates American B44 Planer    pic    (J-1-029)
WWII 1941 Planer put into service by the Air Force! Still in production 24 " x 8" capacity. Table bed 25"x 40" 5 hp direct drive, 3 phase, 3600 rpm motor, 220 volt, 60 cyc. Bed easily adjusts to the cutter head by two nuts on the large lift screws and then moving the hand wheel. 6" dust cover & port. Variable speed adjustment. Foot Brake and new 12" handwheel.
$3,995
To Top of Page
    Tenoners
We Have many Tenoners available: New, Used and Reconditioned arriving weekly!
Challoner Double End Tenoner    pic    (S-2-028)
Rebuilt by Factory Trained Technicians - 6 month warranty.
Model 527-T, 460V, Serial G-527-187-76, 2 (15)HP trim units, 2 (3)HP scoring motors,
2 (10)HP cope motors 5 ¼" to 96" range, 76" loading space
$57,500
Jenkins / 1103 Single End Tenoner    pic    (S-1-012)(w) We Can Rebuild to Your Single End Tenoner Specifications!
Can be viewed or demonstrated in our warehouse. Year/Cond: 1990 / As taken from Service. Voltage: 460V, 3PH, 60Hz. 26" Infeed section, 2 stands 3 stations (1 motor missing). Right-hand fence, block and chain hold downs, 2Hp feed motor Approximate 8 to 48 FPM feed speed. Friction Feed, no chain dogs. Station #1 10HP 3600RPM, 90 degree tilting trim. Station #2 10HP 3600RPM, 90 degree tilting cope. Station #3 Missing Motor, degree tilting cope. As Is, Where Is. Price was $25,000.
Must Sell
Any Offer
Considered!

gif
Mereen-Johnson 640 Double End Tenoner    pic    (S-2-030)
Year/Cond: Unknown. Voltage: 480V. Call for more information 920-452-4494.
Call for
Pricing
gif
Progressive Systems Single End Tenoner pic
First station: Top and bottom tenoning heads - both are 10 Hp. 2nd station: Jump Cope head - 10 hp, 12 inch spindle for stacked tooling. Third station: Climb Cut head - 10 hp, 12 inch spindle for stacked tooling.  More information available.  920-452-4494.
$89,980
gif
SCMI Concept 2000  
Two pass down sizing line with material handling. Call for more information 920-452-4494.
Call for
Pricing
To Top of Page
FOB: Shipping Point DELIVERY: Immediate Subject to Prior Sale TERMS: Payment with order.Minimum of a $125.00 Crating Fee if needed. Prices are subject to change without notice. Used equipment is sold as is, where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight, rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. We reserve the right to correct clerical or specification errors at anytime. All figures USD unless otherwise noted. ATFS=As Taken From Service.
Website Design and Maintenance by Terri Wallace

Schmalz Vacuum clamping Schmalz Multi_Clamp Schmalz Mechanical Clamp Schmalz MonoBase Schmalz Mono Base Schmalz mechanical Clamp VCMC Multi clamp Vacuum Schmalz Vacuum Clamping Systems