Accu-Systems H23 Boring and Insertion

In-stock sales of new items from the JGW Co. warehouse are subject to incoming and outgoing freight charges. FOB: Shipping Point DELIVERY: Immediate Subject to Prior Sale TERMS: Payment with order.Minimum of a $125.00 Crating Fee if needed. Prices are subject to change without notice. Used equipment is sold as is, where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight, rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. We reserve the right to correct clerical or specification errors at anytime. All figures USD unless otherwise noted. ATFS=As Taken From Service.

5 second cycle time
Micro-processor Controller with self diagnostics
Twin dowel feeding bowls
Mirror imaging with automatic proximity switching
5 hold down clamps standard
8 insertion units standard (more available upon request)
Drill only and dowel only cycles
Sealed electronically metered glue/water injection system
One button flush system
Centralized dust collection manifold
Digital readout for positioning of drill and insertion unit
Full length dual locking fences with sawdust groove

Number of spindles 23 on 32mm centers

Tooling length & shank 57mm x 10mm

Power Required 220/3/60

Machine weight 1800 lbs

Dimensions 35” x 42” x 72”

Hold Down Clamps 5 standard

Drill Depth Maximum 1-9/16” (40mm)

Air Required 20 CFM @ 100 psi

Dowel capacity (length) 1” to 2” (25 to 50mm)

Motor H.P. 2 H.P. TEFC 3 Phase (1 phase available)

Material thickness capacity 1/2” to 1-1/4” (standard)

Dowel capacity (Diameter) 8 mm standard

(1/4” to 7/16” (6 to 12mm) available)

Number of insertion units 8 standard
(more or less available on request)