VX Series Accu-Systems

In-stock sales of new items from the JGW Co. warehouse are subject to incoming and outgoing freight charges. FOB: Shipping Point DELIVERY: Immediate Subject to Prior Sale TERMS: Payment with order.Minimum of a $125.00 Crating Fee if needed. Prices are subject to change without notice. Used equipment is sold as is, where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight, rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. We reserve the right to correct clerical or specification errors at anytime. All figures USD unless otherwise noted. ATFS=As Taken From Service.

The VX machine series is designed for many different types of vertical boring. Tables, frames, and frame parts are some of the parts that may be processed with this machine series. Although these machines were designed primarily for solid wood parts, many panel parts may also be machined.

The standard machine is equipped with two independent carriages. These tool carriages have a three spindle individually selectable drill head. Any size bit may be put into any spindle. No tool changer is necessary. Six different tools may be in the machine at any given time.

The machine has a program to automatically measure the length of each tool. This program allows the operator to simply load the tools in the machine without worrying about tool setup. The machine recalls the length of each tool to give the appropriate depth of drilling.

Many drill head configurations are available. 32mm as well as other styles of drill heads are optional. Routing is available in single or multiple head configurations.

The clamping tables are unique in design and setup. Eight clamps are standard. Different clamping heads are available to hold odd shaped parts. Parts may be stacked in the clamping fixtures, and multiple parts may be drilled at once. Locating holes are also tapped into the clamping modules so that fixtures may be used anywhere on the working surface.

Two work zones are standard. Parts may be loaded in one side of the machine while the other side is running. Safety mats are provided for each zone so that the machine will not work while the operator is in front of the working zone.

All motion is CNC controlled, and program storage is unlimited. A color touch screen is used to load and recall programs. Programming is very fast. A new program can generally be written in about two minutes. Hole positions are shown on the screen for easy verification of layouts.

With the VX machine most parts can be run in the same amount of time as was previously needed just for machine setup. Small lot sizes as well as large batches may be run in a short amount of time.