Coping Machine

In-stock sales of new items from the JGW Co. warehouse are subject to incoming and outgoing freight charges. FOB: Shipping Point DELIVERY: Immediate Subject to Prior Sale TERMS: Payment with order.Minimum of a $125.00 Crating Fee if needed. Prices are subject to change without notice.
We reserve the right to correct clerical or specification errors at anytime. All figures USD unless otherwise noted.

The Coping Machine was designed by a Door manufacturer to solve the problems listed above.
It will give you a chip free cope on either single profiled parts, double profiled parts or square parts
Both models have: unlimited length of parts; have two counter rotating 1 ¼ " spindles and motors are duel voltage 230/460 Volt.

C-1203 Coping Machine

Chip free coping of either square, single profiled or double profiled parts.
Two counter rotating spindles 1 ¼ ” Diameter.
Spindle speed 7000 rpm ’ s.
5hp, 3ph 230/460 volt motor ( please specify voltage )
Dust hood 4 ” outlet.
Maximum cutter head 4 ½ ” .
Minimum cutter head 3 ½ ” .
Maximum width of material 9 ½ ” .
Minimum width of material 2 ¼ ” .
Maximum thickness of material 2 ” .
Minimum thickness of material 11/16 ” .
Minimum length of part 3 ” , Maximum length of part ( unlimited )
THK style rails for guidance of carriage stroke & hold down clamp
Cycle time approx. 4 seconds.
Side pressure clamp to insure proper alignment with fence.
Cutter heads totally enclosed for safety.
Material hold down clamp always parallel to work table.
Air blow off of table
Machine approx shipping weight 967 lbs.
Shipping size of crate 38 ” D x 56 ” W x54 ”
TOOLING NOT INCLUDED
FOB, Westmoreland, TN

List Price … ..$ 14,990.00

Made in USA (Patent Pending)
Specification subject of change without notice
Picture is similar but may not be exact

C-1205 Coping Machine

Chip free coping of either square, single profiled or double profiled parts.
Two counter rotating spindles 1 ¼ ” Diameter.
Spindle speed 7000 rpm ’ s.
7 1/2hp, 3ph 230/460 volt motor ( please specify voltage )
Dust hood 5 ” outlet.
Tooling 4 ¼ ” large diameter insert tooling for ½ ” tenon
Tooling 3 ¼ ” small diameter insert tooling for ¾ ” tenon
Maximum width of material 13 ½ ” .
Minimum width of material 2 ½ ” .
Maximum thickness of material 2 ½ ”
Minimum thickness of material 11/16 ” .
Minimum length of part 3 ” , Length of part ( unlimited )
THK style rails for guidance of carriage stroke & hold down clamp
Cycle time approx. 6 seconds.
Side pressure clamp to insure proper alignment with fence.
Cutter heads totally enclosed for safety.
Material hold down clamp always parallel to work table.
Air blow off of table
Machine approx shipping weight 1100 lbs.
FOB, Westmoreland, TN
TOOLING NOT INCLUDED

List Price… … ..$ 16,990.00

Made in USA (Patent Pending)
Specification subject of change without notice
Picture is similar but may not be exact