Omec 650-A AUTOMATIC
NUMERICAL CONTROL MACHINE FOR DOVETAIL JOINTS
sales of new items from the JGW Co. warehouse are subject to incoming and
outgoing freight charges. FOB: Shipping Point DELIVERY: Immediate Subject
to Prior Sale TERMS: Payment with order.Minimum of a $125.00 Crating Fee if
needed. Prices are subject to change without notice. Used equipment is sold
as is, where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight, rigging,
and installation are not included unless otherwise specified, but arrangements
can be made at an additional cost. We reserve the right to correct clerical
or specification errors at anytime. All figures USD unless otherwise noted.
ATFS=As Taken From Service.
SOME TYPES OF POSSIBLE JOINTS
The two-axis automatic mill cutter with numerical control, OMEC 650-A, is designed to indent dovetails and parallel indents for drawers and several furniture elements. Model 650-A is equipped with a spindle and a mill cutter
that allow the production of indents of different heights. The machine is designed to cut single male or female workpieces, or both simultaneously.
Pieces can be clamped and released in manual mode by means of pneumatic valves. Controls are issued from a numerically controlled push button panel.
The 650-A model is controlled by a CNC system that is programmed to manufacture two types of fixed pitch joints (25mm and 50mm).
All the adjustments can be easily carried out following the software instructions of the machine displayed on the monitor.
The machine is supplied with the following components
- Integral Widia cutter installed on the machine
- Tool Kit for adjustments and maintenance
s and instruction manual
MUST BE SPECIFICALLY ORDERED
A05 - Equipment for the machining of small pieces (170-130mm)
A24 - Standard
14 mill cutters in integral HM
14 Mill cutters with deburring tool in integral HM
14 Cylindrical mill cutters in integral HM
14 Diamond mill cutter
14 Diamond mill cutter with deburring tool
SAFETY STANDARDS COMPLIANCE
The machine is designed and built according to EC Safety Standards.