Omec 750 Dovetail

In-stock sales of new items from the JGW Co. warehouse are subject to incoming and outgoing freight charges. FOB: Shipping Point DELIVERY: Immediate Subject to Prior Sale TERMS: Payment with order. Minimum of a $125.00 Crating Fee if needed. Prices are subject to change without notice. Used equipment is sold as is, where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight, rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. We reserve the right to correct clerical or specification errors at anytime. All figures USD unless otherwise noted. ATFS=As Taken From Service.

TECHNICAL CHARACTERISTICS
On board machine installed power	Kw 2,5
Working pressure	MPascal 0,7
Number of spindles	1
Spindle revolutions	rpm 18.000
Center tot center of indents	mm. variable or fixed
Drawers production	n/h 60
Machine weight	kg. 360
Packing dimensions	cm. 126x88x145
Machine memory	40 save-able program capacity

DIMENSIONAL LIMITS OF WORKPIECES
Dimensions	Length	Width	Indent Height	Front Thickness	Side Thickness
Minimum	200mm	60mm	6mm	8mm	8mm
Maximum	1500mm	530mm	25mm	30mm	20mm

STANDARD CONFIGURATION

Integral Carbide cutter installed on the machine

Tool Kit for adjustments and maintenance

User's and instruction manual

OPTIONAL FEATURES (supplied on specific request of Customer)
A05	Equipment for the machining of small pieces (170-130mm)
A24	Standard Ø 14 mill cutters in integral HM
A25	Ø 14 Mill cutters with deburring tool in integral HM
A26/01	Ø 11÷13 Dovetail mill cutters in integral HM
A26/02	Ø 9÷10 Dovetail mill cutters in integral HM
A26/03	Ø 11÷13 Dovetail mill cutters in integral HM
A26/04	Ø 15÷18 Dovetail mill cutters in integral HM
A27/01	Ø 6÷8 Cylindrical mill cutters in integral HM
A27/02	Ø 9÷10 Cylindrical mill cutters in integral HM
A27/03	Ø 11÷12 Cylindrical mill cutters in integral HM
A27/04	Ø 13÷14 Cylindrical mill cutters in integral HM
A28	Spindle clamp for Ø 6÷14 mill cutters
A47	Ø 14 Diamond mill cutter
A48	Ø 14 Diamond mill cutter with deburring tool

The two-axis automatic mill cutter with numerical control, OMEC 750cn, is designed to indent dovetails and parallel indents for drawers and several furniture elements. Model 750cn is equipped with a spindle and a mill cutter that allow the production of indents of different heights. The machine is designed to cut single male or female workpieces, or both simultaneously. Pieces can be clamped and released in manual mode by means of pneumatic valves. Controls are issued from a numerically controlled push button panel. Model 750cn is controlled by a numerical control system programmed to guarantee the utmost machining flexibility and to change the machining limits within the following variables: - pitch of indents - number of indents - depth of indents - dimensions of the pieces - cutting speed and tool feeding - compensation of the tool radius variation All the adjustments can be easily carried out following the software instructions of the machine displayed on the monitor.