Brandt Optimat KD 56CP Edge Bander

In-stock sales of new items from the JGW Co. warehouse are subject to incoming and outgoing freight charges. FOB: Shipping Point DELIVERY: Immediate Subject to Prior Sale TERMS: Payment with order.Minimum of a $125.00 Crating Fee if needed. Prices are subject to change without notice. Used equipment is sold as is, where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight, rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. We reserve the right to correct clerical or specification errors at anytime. All figures USD unless otherwise noted. ATFS=As Taken From Service.

Serial 0-261-02-8667
Equipped with PC-16 Program Control Panel
Automatic height adjustment with top pressure beam for all work stations.
Equipped with digital height indicator for operator convenience.
Working height of 33.5 "
Large Coil Table (800mm Diameter) to accomodate 3mm PVC coils.
Automatic magazine for strip and coil feeding.
Panel edge pre-heating system. Hotmelt granulate glue application system with approximate 12min. heatup time.
Automatic reduction of glue temperature if not run within 15 minutes. This feature lowers the temperature to approximately 150 degrees C. Re-heat time is approx. 2.5 minutes.
Strengthened pre-cutter for cutting 3mm PVC from the coil.
Edgeband thickness capacities - strips: .4 - 3mm Colied material: .4 - 3mm Minimum strip length 9 ".
Panel length minimum 5 1/2 ", Panel width minimum 2 3/8", Panel thickness minimum 5/16", Panel thickness maximum 1 5/8".
Feed speed of panels fixed at 30 FPM.

First pressure-roller driven and one idle pressure-roller equipped with digital setting system.
High Frequency Trimming motors on all trimming stations.
Double motor end trim unit for precision trimming with tilt range from 0-15 degrees.
Program controlled indexing from straight to bevel end trimming.
(2) .25HP 12,000 RPM motors
Fine trimming unit equipped with digital counter for easy changeover.
Tiltable from 0-15 degrees. Straight or 3mm radius cutters can be used.
Program controlled indexing.
(2) .33HP 12,000 RPM motors
Contour trimming unit with program controlled indexing. .5HP 12,000 RPM motor
Buffing unit.
Workpiece support track extendable to 19.5 "
Electronic frequency changer for all trimming motors, with also includes electronic motor braking. Amperage requirements: 20 Amps @ 230V, 10 Amps @460V
Electrical connections: 208/230/440/480
Dust Extraction requirements: 4 " Port, 600CFM
Compressed Air requirements: .18 CFM per panel,
6 bar (85PSI).
Machine footprint max. 12' 10 " x 45", height 53 3/4"
Machine weight 1980lbs.
Electrical components according to UL/CSA listings.