sawgear
  • Portable Profits

  • Cut in the shop or in the field

  • Easily transported

  • For sizing, trimming, installations....

  • Easy to use

  • Can be used in Metal Applications too!

  • Metal Application

  • Not just for wood!

Order Today and Start Saving!
Call (920) 452-4494

Can be used for Metal or Wood!
For Sizing, Trimming, Installations & more
Order Today and Start Saving!

Starts at $3,550!

John G. Weber Co., Inc.
920.452.4494

Miter cuts for crown mouldings present unique challenges. Errors are costly; some sophisticated crown materials can cost up to $75 per foot, so a single misscut can tally hundreds of dollars. Calculation of angles, and the need to match the varying profiles, makes each mitered moulding almost a unique case. So TigerStop, which automated linear saw positioning with its SawGear, is launching the Crown+MiterPro for SawGear at the International Builders Show in Orlando this month.

TigerStop says Crown+MiterPro simplifies any angle cutting, but makes installing crown moulding much easier, reducing the process time in half. Standard SawGear is an automated length measuring system, which attaches to miter and radial arm saws. The Crown+MiterPro feature is now included standard in every new SawGear, is applicable to all types of trim such as crown, base, shoe, casings, along with rafters and any other angle cutting. The software calculates difficult crown angles and lengths instantaneously, providing both a right angle, and side to set a miter saw, along with the correct length for the part. SawGear eliminates pulling a tape measure, making a mark, grabbing a speed square to extend the mark across the board, then positioning and making small cuts until you are on the mark.

“Most of our guys groan when asked to do crown molding,” says Jon Beyer, owner of BarkerBeyer Woodworking in Portland, OR, after testing the SawGear and the Crown+MiterPro software. “The tedious tasks of measuring, marking, and setting gauges is eliminated,” he says. “We are confident our guys will get it right every time.” For existing SawGear owners, TigerStop will upgrade software.

Tigerstop adds Software Option to Sawgear

“If you install trim around a room, every cut length and angle you make is different. There is no repetition at all and this is what takes so much time to put crown and base in. Every wall, even though each has a 90-degree corner, some corners will be 90-1/2 degrees, some will be 89 degrees, and if you just cut it at 90, you wind up with great big gaps. This is a feature that we’ve added to SawGear at no extra cost that will help with that problem...”

Read the rest of the article >>

    Why choose a SawGear?

  • Your cuts are dead on each and every time-
    No more measuring and marking material

  • Streamlines your business-
    Eliminates guesswork and steps

  • Shortens job completion times -
    More completed jobs equals more income

  • Eliminates costly mistakes and rework-
    Improves accuracy and quality of work

  • Done right, the first time-
    The next steps are easier and faster

sawgear
SawGear- fits your machine either to the right or left
Part #   Description   Wt. LBS   Price USD
SG08   SawGear 08, working length 8', overall 10' (includes BR-BM)   65   $3,530
SG12   SawGear 12, working length 12', overall 14' (includes BR-BM)   75   $3,885
SG16   SawGear 16, working length 16', overall 18'' (includes BR-BM)   110   $4,900
SG08-DM   SawGear 08, with double miter Power Head stand   65   $5,060
SG12-DM   SawGear 12, with double miter Power Head stand   75   $5,410
SG16-DM   SawGear 16, with double miter Power Head stand   110   $6,590
SG08-PS   SawGear 08, with vertical panel saw Power Head   65   $4,115
SG12-PS   SawGear 12, with vertical panel saw Power Head   75   $4,475
SG16-PS   SawGear 16, with vertical panel saw Power Head   110   $5,655
MB08   Measuring Bar 08, Ready-to-Run (Power Head Required)   45   $1,905
MB12   Measuring Bar 12, Ready-to-Run (Power Head Required)   65   $2,540
MB16   Measuring Bar 16, Ready-to-Run (Power Head Required)   85   $3,200
SG-CUSTOM   SawGear cut to custom length   CALL   CALL


SawGear- Packages (include single table system)
Part #   Description   Wt. LBS   Price USD
SGPK-08   SawGear 08 Package, includes table system & mounting brackets   132   $5,095
SGPK-12   SawGear 12 Package, includes table system & mounting brackets   152   $5,495
SGPK-16   SawGear 16 Package, includes table system & mounting brackets   227   $7,430
SGPK08-DM   SG08-DM, includes infeed & outfeed table system & mounting brackets   197   $8,610
SGPK12-DM   SG12-DM, includes infeed & outfeed table system & mounting brackets   227   $9,120
SGPK16-DM   SG16-DM, includes infeed & outfeed table system & mounting brackets   342   $10,975
SGPK-CUSTOM   SawGear Package cut to custom length   CALL   CALL


SawGear- Accessories
Part #   Description   Wt. LBS   Price USD
SGTAB08   SawGear table system for SG08 (1 support leg and brackets)   53   $885
SGTAB12   SawGear table system for SG12 (1 support leg and brackets)   61   $920
SGTAB16   SawGear table system for SG12 (2 support legs and brackets)   115   $1,330
SG-TFLG   Extra leg for SawGear table system   10   $400
BR-BM   Mounting Bracket Set (you need 3 for SG08, 4 for SG12, 5 for SG16)   2   $50
SG-CMF   Crown Moulding Foot (replaces foot; adjustable up to 3" on spring angle)   10   $130
SG-PH   SawGear Power Head with power cord   20   $2,200