GEAR UP FOR SPRING Reduced Pricing On Ameri-Can In Stock Items! CALL FOR SPECIAL PRICING (920) 452-4494
Univer 50 Up-Cut Saw The Univer 50 Semiautomatic Cutting Machine for Aluminium and PVC Profiles, single head cutting machine with blade raising, with surface rotating to seven set points from 90° to 22°.5 RH and LH side, with the possibility of intermediate degrees with a manual mechanical stop. Complete with two-hand anti-repeating safety device..
Univer 55FS Back Saw The Univer 55FS Back Cut Semiautomatic Cutting Machines, Single-head cutting machine. Movement of radial blade along linear guides. Retractable blade with front exit. Hydro-pneumatic regulation for blade exit. Double tilting rightwards and leftwards from 22°-90°-158°. Hydro-pneumatic positioning at intermediate angles. Showing of angles by means of a display (Tol. +/- 0,1). Lubrication. Pneumatic horizontal locking devices.Integral protection for the cutting area.
VC 721 V-Mitre Saw The Univer VC721 Semiautomatic Cutting Machine, Cutting machine for making V- cuts in aluminium and PVC profiles; movable cutting carriage with blades set at 45° inclination, that can be adjusted. Manual or pneumatic carriage feeding. Manual setting of cut height by means of hand control with millimetre ruler.
Univer 40 Chop Saw The Univer 40 AI/MP Single Head Cutting Machine, single head cutting machine with descending blade 45° RH and LH manual rotation of head with possibility tilting the cutting unit 45° to the horizontal axis. Complete with two-hand anti-repeating safety device (mod. A1). Low voltage auxiliary system.
FC105 Copy Router The FC 105 P model single head-copying machine is the ideal tool for machining through cuts in aluminium or PVC profiles. With its high level technical and engineering features, it is capable of performing all kinds of profiling (sliding bar inserts, locks, cylinders) with both speed and precision..
FC100 Copy Router The FC-100AP model single head-copying machine is the ideal tool for machining through cuts in aluminum or PVC profiles. With its high level technical and engineering features, it is capable of performing all kinds of profiling (sliding bar inserts, locks, cylinders) with both speed and precision.
ML255 End Mill The ML 255 Horizontal End-Millers , as well as having the normal characteristics for 90° machine cutting, also have an OS device for fine adjustable square machining, up to a maximum of 22.5° RH and LH. To execute millings up to 22.5° on the left, on aluminium profiles, you must rotate the profile of 180° and use an additional cutters group.
ML123 End Mill The ML 123/S Horizontal End-Miller is an ideal machine for windows’ aluminium and PVC profiles. The machine can work with adjustable reference shoulders from –45 to 45 degrees, including all intermediate angles. The machine can be used alternatively as an end-miller or a corner cleaner machine (for PVC profiles), by simply adjusting the moveable support squares and adding a specific vertical clamping kit for corner cleaning operation.
DM 35 Dust Collector The DM35 turbo exhauster is especially suitable for workshops producing aluminum or PVC door and window frames or other sectors which require this type of waste removal system. The exhauster is fitted with an electronically balanced turbine, housed in a aluminum enclosure and fixed directly onto the engine shaft. This unit requires no maintenance and ensures the upkeep of technical features and silent operation over time. Furthermore the exhauster has a rapid release trolley-type container for the replacement of full sacks, and a large surface area filter with optimal sealing efficiency protected by a cyclonic separator with external manual emptying device. The exhauster is supplied complete with a thermal magnetic circuit breaker.
HP 601 Corner Crimper The Univer HP601 Corner Crimping Machine is particularly suitable for fitting aluminum profiles on to squares of the same material by means of cold plastic deformation. The machines compact structure and the choice of materials used in its construction give it great working strength and guarantee the high quality of work. The work cycle, using a hydraulic press for the deformation, is PLC controlled. The simple system settings for the pusher wedge and knives makes the machine easy to use and ensures the repeatability of results over time.
John G. Weber Co., Inc. 920.452.4494 1133 S. 7th St. - Sheboygan, WI 53081 Email Us       www.johngweber.com Fax: 920.452.4395
In-stock sales of new items from the JGW Co. warehouse are subject to incoming and outgoing freight charges. FOB: Shipping Point DELIVERY: Immediate Subject to Prior Sale TERMS: Payment with order. Minimum of a $125.00 Crating Fee if needed. Prices are subject to change without notice. Used equipment is sold as is, where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight, rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. We reserve the right to correct clerical or specification errors at anytime. All figures USD unless otherwise noted. ATFS=As Taken From Service.