SCMI Tech 100

FOB: Shipping Point DELIVERY: Immediate Subject to Prior Sale TERMS: Payment with order.Minimum of a $125.00 Crating Fee if needed. Prices are subject to change without notice. Used equipment is sold as is, where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight, rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost. We reserve the right to correct clerical or specification errors at anytime. All figures USD unless otherwise noted. ATFS=As Taken From Service.

Model Year 1997 380V, 3PH
Work surface capacities X-axis stroke = 118",
Y-axis stroke = 47.2" stroke, Z-axis 3 1/8", the capacities change when routing to: X-axis 114",
Y-axis 41"
Programmable speed in X- and Y-axis is 165 FPM, positioning speed of 245 FPM
Equipped with: (18) independent vertical boring spindles forming a T-configuration with (9) spindles on the Y-axis and (9) spindles on the X-axis. A total of (6) horizontal spindles for boring on all four edges of the panel, (4) on the X-axis (2 in each direction) and (2) are paralleled with the Y-axis (1 in each direction); (6) adjustable panel supports each with (2) vacuum cups.
Includes (2) vertically mounted routers, 7.5 HP each, inverter driven 9,000-18,000 RPM, ISO 30 tool holders; (1) 2HP - 6,000 RPM grooving saw with 120mm diameter blade capacity for grooving in the X-axis direction, worktable set up for (2) independent working areas with (8) rear stops, (4) lateral stops and (1) central stop for mirror-image operation Separate control cabinet with KTL 10500 CNC 32-bit multiprocessor, 256KB RAM, 8" monochrome graphics monitor, alphanumeric keypad, 3 1/2" floppy disk drive and RS-232 serial port
The above specifications are standard to this model and would have to be verified for this particular machine upon purchase.