Pillar Machine Year-End Clearance - Extended


Year-End Clearance

Extended through January


Freight included if deposit received by 1/25/2021


Contact John G. Weber Co., Inc. to order

920-452-4494 or service@johngweber.com



MMTX - Pre-Owned

The MMTX is a full 6 Axis CNC machining center used for producing high quality miter joints used in cabinet door manufacturing. This machine produces between 500-800 doors per 8 hour shift with one operator.

Mfg: 2010

220V, 3Ph

Serial #: 016-10-MMTX-WELLBORN




HPLD - Pre-Owned

The HPLD is a horizontal point to point Lockdowel inserting machine and one of the finest line boring machines for cabinets available. This machine will insert H-clips, Channel Locks and Spring Pins with ease.Using CNC control, this machine positions the drilling spindle to bore holes and insert the Lockdowel hardware.

Mfg: 2017

220V, 3Ph

Serial #: PM-048-17-HPLD-4



HPP- Pre-Owned

This HPP is a horizontal point to point bore and dowel insertion machining center. It is designed to CNC position the spindle, bore a hole, then CNC position the inserter, inject glue or water (for pre-glued dowels), and fire the dowel into the hole.

Mfg: 1998

220V, 3Ph

Serial #: HPP 057-98-H6CE24



PLT - Pre-Owned

This pre-owned PLT has been a showroom model at one of Pillar Machine's dealer's shops. Because it has been a floor model, it must be sold as used. It’s in excellent condition.

Mfg: 2014

110V

Serial #: PM-007-14-PLT-3



2S - Pre-Owned

This pre-owned 2S a multi-axis, multi-function CNC horizonal machine. It is designed to size edge glued panels safely and accurately.

Mfg: 2011

220V, 3Ph

Serial #: 008-011-2S-Taylorcraft



S2 - Pre-Owned

This pre-owned 2S a multi-axis, multi-function CNC horizonal machine. It is designed to size edge glued panels safely and accurately.

Mfg: 2011

220V, 3Ph

Serial #: 052-011-2S-Taylorcraft



FJ - Demo Model

The FJ is a Finger Joint Machine that utilizes a dual spindle PLC machining center for producing high quality finger joint miters used in cabinet door manufacturing. It includes two 5 HP motors for cutting the miter, two 1 HP spindles for drilling dowel holes. There is a hogging tool to remove the majority of material before the finger joint is cut. This saves on tooling costs for finger joint tools. The FJ is driven and controlled by a Galil PLC. This means there is no complicated computer to operate or repair. There is no CNC motion on this machine. It is entirely controlled by PLC, pneumatics and relays.

Mfg: 2019

220V, 3Ph

Serial #: PM-031-19-FJ-3


FMD - Demo Model

The FMD is a PLC driven machining center used for producing high quality haunch joints, which are used in cabinet door applications. The haunch blades cut each side of the haunch in one single pass. The FMD can haunch and mortise on both stiles and rails. The router spindles cut mortises on the rail and stile ends of the work piece. The FMD will produce an estimated 200-250 doors per shift.

Mfg; 2019

220V, 3Ph

Serial #: PM-035-19-FMD


Contact John G. Weber Co., Inc. to order

920-452-4494 or service@johngweber.com