CNC Miter Door Machines


Make solid miter joints using mortise and tenons created with Pillar Machine's line of CNC Miter Door Machines.

M45 - The M45 is Pillar's smallest machine designed for creating blind mortise, and tenon joints on a mitered angle. It is a full 2 axis CNC machine. The table top is V-shaped to allow machining of two parts at one time. Referencing is done on both the outside and face of the profile for accurate joints. The computer controls the size of the mortise and tenon. Programs are stored and recalled as needed. Changing from program to program is accomplished in seconds. Small runs as well as large batches may be done on this machine. This machine produces between 150-175 doors per 8 hour shift with one operator.


MMTJ - The MMTJ is Pillar's most popular machine designed for creating blind mortise, and tenon joints on a mitered angle. It is a full 3 axis CNC machine. The table top is V-shaped to allow machining of two parts at one time. Referencing is done on both the outside and face of the profile for accurate joints. The computer controls the size of the mortise and tenon. Programs are stored and recalled as needed. Changing from program to program is accomplished in seconds. Small runs as well as large batches may be done on this machine. This machine produces between 175-200 doors per 8 hour shift with one operator.


MMTX - The MMTX is the industry’s highest producing machine designed for creating blind mortise, and tenon joints on a mitered angle. It is a full 6 axis CNC machine. It is much like our MMTJ and M45 machines with exception that it has one dedicated carriage to produce the tenon end and another dedicated carriage to produce the mortise side. Each side of the machine has two loading stations. The computer controls the size of the mortise and tenon. Changing from program to program is accomplished in seconds. Small runs as well as large batches may be done on this machine. This machine produces be-tween 400-500 doors per 8-hour shift with one operator.



FJ - The FJ is a dual spindle PLC machining center used for producing high quality finger joint miter parts used in cabinet door manufacturing. It includes two 5 HP motors for cutting the miter and two 1 HP spindles for drilling dowel holes. There is a hogging tool to remove the majority of material before the finger joint is cut. This saves on tooling costs for finger joint tools. The FJ is driven and controlled by a Galil PLC. This means there is no potentially complicated computer to operate. Because this machine has two independent carriages, it can simultaneously cut two parts at one time, making it extremely fast. It can produce be-tween 250-350 doors per 8 hour shift with one operator. 




Contact John G. Weber Co., Inc. for a quotation on any of these machines!

920-452-4494 or e-mail: service@johngweber.com