Omec 750 Semi-Automatic Dovetailer, 2004, 3HP, 230V, 3PH, 1500mm x 480mm Workpiece Capacity, Cleaned, Checked

Omec 750 Dovetailer, 2004, 3HP, 230V, 3PH, 1500mm x 840mm Workpiece Capacity, Cleaned, Checked 

Clean, I believe one owner machine out of smaller shop that retired.

Omec 750 Dovetail Machine -OMEC 750 is a semi-automatic machine for dovetail joints, a single-spindle, fixed gauge machine. it was the first semi-automatic machine put on the market.

The 750 can produce up to 40 boxes/hr. Clamping is by pneumatic cylinders for quick loading and unloading. The eccentric router cutter allows easy adjustment to attain the desired fit even when the cutter is sharpened. The 480mm capacity allows you to make deeper drawers. Chip breakers can be installed on the fences to minimize breakout on more difficult materials. This is an excellent machine for small to medium sized manufacturers where dovetail drawers are required.

Semi-Automatic milling machine for dovetail joints

It is used for making joints on drawers and various pieces of furniture.

The machine is equipped with a spindle unit with cutter which

allows the creation of joints with different heights.

It can machine male, female, and male-female single pieces

simultaneously.

It can work at two different feed speeds

The commands on the control panel on the machine.

Minimum piece length. 200 width 60 mm

Maximum piece length 1500 width 480 mm

Center distance 25 mm

Spindle revolutions per minute 18,500, Kw 2,2 Volt, 230 three-phase

Joint production Speed 1 Approx. 25 boxes an hour, Speed 2 Approx. 35 boxes an hour

Dimensions (length x width x H) cm 800x1300x1200

Weight kg 350