As is Mfg 1984 75HP, 75HP 460V 3PH (2) Contact drums 11-1/2" smooth steel Soft feed works 4...

As is Mfg 1982 50HP, 50HP 230V 3PH (2) sets of 6" infeed rolls (2) sets of 6" outfeed rolls ...

Cleaned and checked 1.5HP abrasive belt drive motor 220V 1PH 4" x 132" abrasive belt dimensions (...

As taken from service 697 hours on machine Mfg. 1991 (2) top heads - one orbit, one brush (1)...

As taken from service 30HP 20HP main 220/440V 3Ph 1 Rubber covered cylinder C/200, 80 durome...

2HP 1PH/115 volt or 3PH/230 or 460 3400 CFM 77 dbs 490 lbs. 28" x 72" x 34-1/2"

NEW 10HP 220V 1Ph Photo electric belt tracking. Pneumatic belt tensioning. 2 ½” graphite cove...

NEW 10HP 220V 1PH Photo electric belt tracking. 2 1/2″ removable platen. 2 height adjustment i...

As taken from service 230 or 460V 3 PH 60 Cy 2-head 37" width capacity (1) orbital platen (1) bru...

NEW Oscillating system is driven from main motor by gear mechanism Equipped with cast aluminum f...

NEW 15HP 208V 3PH Photo electric belt tracking. 2 1/2″ removable platen. 2 height adjustment i...

Cleaned and checked 1HP 230V 3PH 1 1/4" spindles

As taken from service 460V Operating height 850mm Operating width 1350mm 3-120mm workpiece thickn...

NEW 6" x 158" belt, platen length 60" 3 HP TEFC ball bearing 3 phase motor 1750 RPM Voltage: 220...

Cleaned and checked 1HP 208-230/460V 3PH Mounted on steel stand

Cleaned and checked 1.5HP 230/460V 1PH 60Hz

Cleaned and checked 5 HP 240 V 3 PH Height capacity: 6" 7" x 48" graphite-coated platen Belt capa...

Looking for replacement belts for your wide belt sander? We can provide belts in sizes from 24" ...