Ironwood Upcut Saw, Cut14L, 5HP, 3PH, 14" Blade Cap. 1" Arbor, Cutting capacity 1” x 10”/ 2” x 9”...

Cantek PCS24 24″ Blade Capacity PNEUMATIC CUT-OFF SAW, 4" x 19", Cut Capacity, 15HP, 230V, 3PH A...

Cantek PCS14, 14″ Blade Capacity PNEUMATIC CUT-OFF SAW, "2 x 9" Cut Capacity, 5HP, 230V, 3PH Ava...

Cantek PCS18 18″ LH or RH PNEUMATIC CHOP SAW, 4" x 10" Capacity, 230V, Three Phase Speed up your...

Cantek PCS-18M Non-Ferrous Pneumatic Cut-Off Saw, 10HP, 230V, 3PH, Blade Included, Air over Oil S...

Cantek PCM-508 Pneumatic Cut-off Saw w/ Rotary Table For Miter Cuts, 20" Blade Cap., 3PH The Can...

Whirlwind 212L or 212R Refurbished Upcut Saw, 4" x 10" stock capacity, 18" blade, 10HP, 3PH Motor...

Whirlwind 1000L Upcut Saw, 5HP, 3PH, "as is", for parts or rebuilding

Adjustable maximum 45 degree to the right or left or 90 degree angle setting for semi-automatic, ...

Semi-automatic, fast cutting. Auto. cutting cycle simply operated by foot switch. Sealed long-l...

Semi-automatic, fast cutting. Auto. cutting cycle simply operated by foot switch. Sealed long-l...

Pat Mooney Saws PMI-CNC 18 MDS Automatic Upcut Sawing Center, 7.5HP, 4.3 x 11.8 Sawing Cap, Pushf...

Whirlwind 1000L Upcut Saw, 5HP, 230V, 3PH 2 x 6 Capacity Just in, to be cleaned, Checked, repai...

Pistorius LHSC12P, Pneumatic Cut Off Saw, 3HP, 3PH, Being repaired Pistorius Machine Co Model: ...

ATech Crater-06 AP, Automatic 20" Aluminum / Plastics Upcut Saw 5.5HP, 220/440V, 3Ph 20" blade ...

Whirlwind 1000L or R, 5HP, 3PH, Rebuilt 2024, 2 x 6 Capacity 14" Blade Cap. Picture is of used m...

Refurbished 216L available, price reflects mechanical refurbishment* and repainting. Double palm...

Pistorius EMN-14 Double Miter Saw, 14" Blade Capacity, 230/460V, 3PH, To be refurbished

Pistorius MN-200 Double Miter Saw, 12" Blade Cap. 2 5/8" x 3 5/16" Cutting Cap., Refurbished Cle...

Pistorius MN-200 with Stop, Infeed, Outfeed, Power-Loc Stop, Very Good Cond. Good used Pistorius...

Pistorius MN-200, Rebuilt 2024, (2) 1.5HP motors, 480V, 3PH, Premium Bearing / Belt / Idler Set-u...

Pistorius MN-200, Rebuilt 2024, (2) 1.5HP motors, 480V, 3PH Core machine in to rebuild, allow 8 ...

Selco WN2, Horizontal Beam Panel Cutting Technology for Small Businesses, Horizontal Beam Panel S...

Veneer Panel Production Package, Adolf Pferffer Saw, Viggo Larson Guillotine, Diehl Stitcher, Qui...

Frommia 660, Double Miter saw for Zero Tolerance Wood Frame Joints, 1987, 480V 3PH Cleaned, chec...

Cantek FR-200, 24 Blade Frame Saw, 25HP, 3PH, 205mm Max Thickness, 400mm Max Width, Up to 2 M/min...

New Tool Zero clearance flush cuts As an undercut saw, safer and easier to control than traditi...

Omga T50 350 14" Mitre Chop Saw, 3HP Motor, Width Cutting Capacity 6 11/16", Thickness Capacity 4...

American Saw Mill Machinery Co. / Monarch Unipoint Radial Arm Saw, 5HP, 3PH, 230V Cleaned and Ch...

Delta 50A 12" Radial Arm Saw, 5HP, 3PH, with Infeed and Outfeed Tables

Omga RN 450, 12" Radial Arm Saw, 4HP, 3PH Motor, 17 3/4" Cross Cut Capacity, 26 3/4" Rip Capacity...

Silver SCF-100SR Slat Making Saw, 4" x 2.375" Capacity, 2003, Multiple blades 110-180mm Cap., 28....

Altendorf F45 Sliding Table, 2000, Tilting Arbor Panel Saw, 10Ft Cap., 3PH - PARTS MACHINE Main ...

Altendorf F45 2800PX Sliding Table Saw, 1987, Tilting Arbor Panel Saw, 9Ft Cap., 3PH, Cleaned, Ch...

SCMI Sliding Table Saw - Model SI 15F Will be cleaned, checked, in good running condition This ...

Castaly Stake - Pyramid, Arrow, Chisel Point End Cutting Machine, 5HP (x2), 3PH, Working Length 1...

Rockwell 10" Unisaw 34-450 with 52" Powermatic AccuFence, 1.5HP, Single Phase, New bearings in Ar...

Tannewitz Model U Table Saw, 1942, 16" Blade Capacity, 4" Blade projection, 5HP, 3PH, Cleaned, Ch...

Delta Contractor Saw, Fence, Tube rails, 1.5HP motor. Needs Repair electrical / capacitor needs ...

Powermatic 66 10 Inch Table Saw with 52 Inch Fence, 1992, 5HP, 3PH, 230V, Cleaned, Checked Clean...

Delta RT-31 Table Saw, 10" Blade, 12" without scoring, 5HP, 3PH, 52" Fence To be Cleaned and che...

Cleaned and checked 5HP, 230/460V, 3Ph Includes Excalibur overhead dust collection

Sawstop ICS51230, 10" Industrial Table Saw, 36" Fence and Rails, 5HP, Single Phase, 230V Drop sh...