Pistorius

Pistorius Cogged Drive Belt
Common HD cogged timing belt, urethane steel cord construction For 100, 200, and 300 MN models
$64 (USD)
Details
Pistorius Cogged Drive Timing Belt
Common cogged timing belt for MN 100, 200, and 300 models.
$32 (USD)
Details
Pistorius Blade Guard T-Screw & Washer
Fits all Pistorius Double Miter Saws MN and EMC series blade guards
$10 4 for $30.00
Details
Pistorius Foot Pedal Guard
For VSF-4302
$150 (USD)
Details
Pistorius Taper Pin
For locking spindle in place to change a blade or belt Replaces Pistorius part # 798-MN
$30 (USD)
Details
Pistorius Spindle Bearing Set
Import bearing set - single row and double row bearing - for one regular spindle - $32.00 Nachi b...
$32 $117.00 Nachi bearing set
Details
Pistorius Spindle Nuts
Left Hand - Part # MN00G056 Right Hand - Part # MN00G057
$90 (USD)
Details
Pistorius Filter Regulator Lubricator
Air inlet 3/8" Max. pressure: 1.0Mpa/150 PSI Temperature range: 5-60° C (40-160°F)
$54.95 (USD)
Details
Pistorius Foot Pedal
$225 125.00 Used (pictured)
Details
Pistorius Timing Spindle Pulley
With taper lock bushing Replaces # MN00U034
$70 (USD)
Details
Pistorius Wrench - New Style
4-pin Use any 3/4" socket driver
$119 (USD)
Details
Pistorius Motor Belt Pulley
New - replaced Part # 18LM100-7/8 Used - Part # 18LM100-7/8
$115 $85.0 Used
Details
Pistorius Cylinder Yoke
Replaces part # CI-1286-MN Milled from solid steel, will not break like a cast iron yoke Can be s...
$350 (USD)
Details
Pistorius Pneumatic Main Drive Cylinder - 6" stroke
New main drive/actuation cylinder for Pistorius double miter saw models 100, 200, 300, and 101 on...
$350 (USD)
Details
Pistorius Dust Collection Chute
Thicker gauge for all Pistorius MN series saws.
$575 (USD)
Details
Pistorius Motor
Baldor brand
$519 (USD)
Details
Pistorius Cylinder Rebuild Kit
For 2.5" Allenair cylinders
$61.50 (USD)
Details
Pistorius Motor
Brook Compton manufactured Replacement for all MN series saws
$375 (USD)
Details

TigerStop

Tigerstop Motor Encoder Cable
The Motor Encoder Cable connects motors to the Amplifier (AMP6) in a TigerStop, TigerFence, or Ti...
$65 (USD)
Details
Tigerstop Motor Kit
igerStop Replacement Motor Kit. This kit includes the following items: Motor Mount Motor End Pul...
$2,340 (USD)
Details
TigerStop Motor End Pulley
This pulley is compatible with TigerStops using a 32mm (1.26") width belt. It also ships with a r...
$65 (USD)
Details
Tigerstop Motor End Sensor
The Motor End Sensor (MES2) signals the limit of travel near the motor. It is compatible with Tig...
$115 (USD)
Details
TigerStop GangStop Pusher Foot
Flat pushing attachment for the TigerStop. Pushing surface 10" x 3", can be adjusted 6" - 25" bey...
$695 (USD)
Details
Tigerstop Motor Plate Bearing
This is the bearing for the TigerStop motor mount.
$30 (USD)
Details
Tigerstop Motor Box End Cap & Gasket
his is a replacement end cap for the Amplifier (AMP6).
$65 (USD)
Details
Tigerstop 4' Idle End Sensor
The idle end sensor signals the limit of travel far from the motor. IES2-04 is an idle-end senso...
$145 (USD)
Details
TigerStop Motor Box Cover
Replacement cover for the Amplifier (AMP6).
$125 (USD)
Details
TigerStop SB Spring Buffer
Flat pushing attachment for the TigerStop. The pushing surface is 6.5" x 3", and can be adjusted ...
$695 (USD)
Details
TigerStop Locking Handle
Locking Handle (includes handle, bolt, & washer). The Locking Handle is used on various pusher fo...
$20 (USD)
Details
TigerStop Extended Pusher Foot
The extended pusher foot is a flat pushing attachment for the TigerStop. The pushing surface is 3...
$695 (USD)
Details
TigerStop Mini Gangstop
This is a flat pushing attachment for the TigerStop. The pushing surface is roughly 4.0 by 0.75 i...
$335 (USD)
Details
Tigerstop U Slot
This hard plastic trim fits snugly in the T-slots on TigerStop extrusions, and is sometimes used ...
$2 (USD)
Details
TigerStop Miter Gauge
The Miter Gauge (MG) is an attachment for the TigerStop, intended for applications requiring a 45...
$585 (USD)
Details
Tigerstop UV Scanning Pusher Foot
TigerStop's Scanning Pusher Foot can be used on standard TigerStops as well as TigerSaw 1000s and...
$6,300 (USD)
Details
Tigerstop Extended Miter Gauge
The extended miter gauge is an attachment for the TigerStop, intended for applications requiring ...
$695 (USD)
Details
Tigerstop Center Pusher
The Center Pusher is an attachment for the TigerStop, used for pushing material on center. The pu...
$899 (USD)
Details
Tigerstop Flip Away
The Flip Away is the external portion of the TigerStop carriage. It provides two T-slots for moun...
$435 (USD)
Details
TigerStop Internal Carriage
The internal carriage connects the TigerStop belt inside the beam to the flip away outside of the...
$530 (USD)
Details
TigerStop Idle End Pulley
The idle end pulley is for TigerStops using a 32mm (1.26") width belt. It is compatible with the ...
$115 (USD)
Details
TigerStop Idle End Carriage
The Idle End Carriage/Far End Carriage is for TigerStops using a 32mm (1.26") width belt. It cont...
$270 (USD)
Details
Tigerstop Idle End Cap
The Idle End Cap is a plate that covers the end of the TigerStop extrusion that is far from the m...
$135 (USD)
Details
Tigerstop Dust Seal Strip
Dust seal strip helps keep dust and debris out of the TigerStop beam. Dust seal strip is ordered ...
$2 (USD)
Details
Tigerstop Metal Value Pack 20'
The 20 foot (6 meter) Metal Value pack is for TigerStop machines up to 22 feet overall length (TS...
$385 (USD)
Details
Tigerstop Metal Value Pack 10'
The 10 foot (3 meter) Metal Value pack is for TigerStop machines up to 12 feet overall length (TS...
$290 (USD)
Details
Tigerstop Amplifier
The amplifier (AMP6) is the circuit board driving the motor in most TigerStop positioners. AMP6 i...
$2,070 (USD)
Details
Tigerstop I-O Panel
The I/O panel interfaces with peripheral devices including barcode scanners, printers, clamps, an...
$999 (USD)
Details
Tigerstop Encoder
This rotary Encoder works with TigerStop, TigerFence, and TigerCrossCut. The cable connecting the...
$470 (USD)
Details