Cantek

Cantek SS512CB, 7.5HP Production Shaper, 1 1/4" Interchangeable Spindle, 5 Spindle Speeds, Electronic Brake
Cantek SS512CB 7.5HP Production Shaper, 1 1/4" Interchangeable Spindle, 5 Spindle Speeds, Electro...
$11,200 (USD)
Details
Cantek SS512CB, 7.5HP Production Shaper, 1 1/4" Interchangeable Spindle, 5 Spindle Speeds, Electronic Brake
Cantek SS512CB 7.5HP Production Shaper, 1 1/4" Interchangeable Spindle, 5 Spindle Speeds, Electro...
$9,100 (USD)
Details
Cantek SS512CB, 7.5HP Production Shaper, 1 1/4" Interchangeable Spindle, 5 Spindle Speeds, Electronic Brake
Cantek SS512CB 7.5HP Production Shaper, 1 1/4" Interchangeable Spindle, 5 Spindle Speeds, Electro...
$10,200 (USD)
Details
Cantek PS515 Programmable 10HP, 3 Phase Shaper with HSK Spindle for Rapid Tool Changes
CANTEK | PS515 PROGRAMMABLE SHAPER Rapid Setting with Precise Results. The Cantek PS515 program...
$29,900 (USD)
Details

Cope & Stick

PMK Systems C-1205 Coping Machine
NEW 7.5HP 230/460V 3PH (2) 1-1/4" counter-rotating spindles 7000RPM 60 seconds or less tooling c...
$26,240 (USD)
Details
PMK Systems C-1203 Coping Machine
NEW 7.5HP 230/460V 3PH (2) 1-1/4" counter-rotating spindles 7000RPM 60 seconds or less tooling c...
$23,240 (USD)
Details
Voorwood A5615 Automatic Double-Side Cope & Stick Shaper
- Designed for shaker door production - First single machine to automatically profile, size & squ...
Contact us for price
Details

Other Shapers

Used Rockwell Shaper, 3PH, Fence
Rockwell Shaper, 3PH, Fence Powers up, runs, nice old original motor it seems, may need bearings.
$875 (USD)
Details
Used Mikron RO100 Rosette Shaper
As taken from service Mfg 1998 3HP 206-230/480V 3PH 6000 max. spindle RPM Includes hopper ...
$4,250 (USD)
Details
Used Griggio T1000 Shaper, 4.7HP, 3PH with Delta 3 Wheel Power Feeder, 1HP, 3PH, 230V, Cleaned, Checked
Griggio T1000 Shaper, 4.7HP, 3PH with Delta 3 Wheel Power Feeder, 1HP, 3PH, 230V, Cleaned, Checke...
$1,995 (USD)
Details
Used Weaver Door Shaper System
Cleaned/checked Mfg. 1993 Sold as a set: (3) Model 1336 machines - 3HP - 208-230/460V - 3Ph -...
$7,000 (USD)
Details
Used Shaper / Moulder / Project motor, 10HP, 380V, 50HZ
Shaper / Moulder / Project motor, 10HP, 380V, 50HZ 10HP Spindle for stack tooling From 8-spind...
$750 (USD)
Details
Weaver LM-90 Lock Miter
New machine 2- 5.5HP direct drive spindles Inverter controlled spindles RPM- 7000 2/3 HP powe...
$18,000 (USD)
Details
Cantek JEN-60 Drawer Notcher
NEW Designed to notch and drill the underside of a drawer box for mounting undermount drawer slid...
$10,500 (USD)
Details
Used
Sicm-Chambon 10HP Shaper with Holz-Her ETZ power feeder Still in a production facility hooked to...
$2,995 (USD)
Details

Raised Panel Door

EZ Door Raised Panel Door Machine
This freestanding machine can produce an entire 5-piece door in a matter of minutes. Easy to oper...
$30,550 (USD)
Details
Used Unique 250 Raised Panel Door Machine
Unique 250 Raised Panel Door Machine, 3PH In good running condition, but older model. Secondary...
$5,995 (USD)
Details