For removing part S-1150-8-MN Outer Bearing Lock Nuts Free ground shipping within lower 48 states.

Solid Arm and Bushings for MN-200 Saw Replaces S-4285-6-MN, loaded with 2 bushings part AA-650-1...

Free ground shipping within lower 48 states.

Shipping included

Includes shipping

Set of two cogged belts for the newer 2-belt drive system Powermatic part #: 6077225 Free ground...

Free ground shipping within lower 48 states. (1) Pin - $59 (2) Pins - $99

Replaces obsolete part #6060009 Deep Grove - HCH Brand Quality bearing ABEC3 Free ground shipp...

New, not in box. Compatible with ICS, PCS, CNS models.

No charge with new Schmalz Jumbo Lift! Brand new; never used. For lifting tube with 178mm diamete...

10HP Spindle for stack tooling From 8-spindle Harbs Moulder Photos coming soon

10HP Spindle for stack tooling From 8-spindle Harbs Moulder Photos coming soon

The idle end sensor signals the limit of travel far from the motor. Indicate part # below for cor...

This 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6). CC5-10 is 10 feet (3.0 m)...

The Back Fence Ruler is a tape measure with an adhesive backing, frequently mounted to the Back F...

TABBR - These brackets attach the legs to the table for all flat TigerStop feed tables. They are ...

Flat pushing attachment for the TigerStop. The pushing surface is 6.5" x 3", and can be adjusted ...

The Back Fence Ruler is a tape measure with an adhesive backing, frequently mounted to the Back F...

Replacement steel roller for 14" wide steel roller tables. Part number MR or M3910.

The back fence ruler is a tape measure with an adhesive backing, frequently mounted to the back f...

Feed table hardware pack. You will need one hardware pack per section of table/leg set.

Replacement plastic roller for 14" wide plastic roller tables. Part number CR or M3911.

The Back Fence mounts onto tables and comes in 6' sections. It is often paired with a Back Fence ...

TigerSPC is a statistical process control caliper set designed to be attached to the TigerStop ta...

Replacement receiver for TigerSPC.

TigerSPC is a statistical process control caliper set designed to be attached to the TigerStop ta...

This is the throat plate for the table top on the TigerSaw 1000. It is not compatible with TigerS...

This is the throat plate for the table top on the TigerSaw 1000 (second generation model, 2016-cu...

This is a replacement pilot light for the TigerSaw 1000 and TigerSaw 2000.

This is a replacement idle pulley for TigerSaw saw systems.

This belt connects the saw motor to the saw arbor in a TigerSaw 1000, TigerSaw 1000G2, or TigerSa...

TigerRack Universal Mounting Bracket.

This is an AC motor for the TigerRack. It is incompatible with version 4 electronics.

This plug is used to connect a six-conductor cable with the six-pin I/O port on the amplifier. So...

This roller switch is used in the Standard Interconnect Kit. It is also used as an end-sensor for...

The solenoid valve for the Standard Interconnect Kit includes the following items: 4 brass fittin...

The standard interconnect kit is one way of integrating TigerStop machinery with your tool. A rol...

This is an AC motor for the HeavyDuty 2. Important Information About Ordering This Part: MOT-HD2 ...

This is a flat pusher attachment for the TigerTurbo or the HeavyDuty 2. The pushing surface is 12...

This is a flat pushing attachment for the TigerTurbo or HeavyDuty 2. The pushing surface is 12.25...

This is a flat pushing attachment for the TigerTurbo or HeavyDuty 2. The pushing surface is 12.25...

The Serial Extender is a kit with additional cabling that is used for machines over 16 feet in ov...

The saw attachment plate is used for mounting 14.4" TigerStop feed tables to various tools. It is...

I/O cable (6-pin) 30' extension cable.

I/O cable (6-pin) 20' extension cable.

The Ethernet to Serial Converter allows up to two TigerStop machines to be connected to a network...

Dust cover pack

This is the Amplifier (AMP6) to I/O PANEL cable assembly.

M8 T-nut.

220V for power cable for all TigerStop products except SawGear.