Sold

Edgetech Countertop Saw CTS730, 3PH Very good condition, low use saw just removed from manufactu...

Ironwood Upcut Saw, Cut14L, 5HP, 3PH, 14" Blade Cap. 1" Arbor, Cutting capacity 1” x 10”/ 2” x 9”...

Pat Mooney Saws PMI-CNC 18 MDS Automatic Upcut Sawing Center, 7.5HP, 4.3 x 11.8 Sawing Cap, Pushf...

Stromab RN450, 18" Blade Capacity, 5.5HP, 220V, 3PH, 330MM Cutting Capacity at 25mm High This li...

Stromab TR450 Upcut Saw With Tigerstop TS10 Digital Stop w/optimizing, 5.5HP, 220V, 3PH Stromab ...

Pistorius LH18UC-P, 18" Blade Cap. Upcut Saw, 7.5HP Motor, 440V, 3PH, Short multiple stop System,...

Cleaned and checked 2022 Brand new 10HP, 480V, 3Ph motor Lauderdale's "18" simple saw" model I...

Pistorius MN-200 Double Miter Saw, 12" Blade Cap. 2 5/8" x 3 5/16" Cutting Cap., To be Refurbishe...

Pistorius MN-200 Double Miter Saw, 12" Blade Cap. 2 5/8" x 3 5/16" Cutting Cap., Refurbished Cle...

Pistorius MN-200, Rebuilt 2024, (2) 1.5HP motors, 480V, 3PH Core machine in to rebuild, allow 8 ...

Pistorius EMN-14 Double Miter Saw, 14" Blade Capacity, 230/460V/575V, 3PH Recently reconditioned...

Pistorius MN-200 Double Miter Saw, 12" Blade Capacity, (2) 1.5HP Motors, 3PH, Mechanically Refurb...

Pistorius MN-200 Double Miter Saw, Refurbished 2024, (2) 1.5HP motors, 3PH Saw is set to 230V, 3...

Selco 2021 Horizontal Beam Panel Saw Still in a production facility Model WN 250 3800/3800 Buy...

The heaviest duty of all models of OMGA's Precision Miter Chop Saws (along with the T 53 370). I...

Omga Optimizing / Defecting Crosscut Saw, T 2030 NC, 2006, 480V, 3PH Prior model the same or sim...

Omga T522 SNC 4000 Cut-Off Saw, 2012, 500MM Blade, 230V, 3PH As taken from service Mfg 2012 23...

Fortis / Polamco 4' Sliding Table Saw

Dewalt Radial Arm Saw 220 1 ph

Jigsaw 110v variable speed

220 DC have a 1.5 hp 220 3 ph direct replacement motor for it

Rockwell / Delta 16 Inch Radial Arm Saw, 16-RAS, 1974, 5HP, 230V, 3PH, Cleaned, Checked, 18" Cros...

THE ORIGINAL SAW CO. 16" RADIAL ARM SAW, MODEL 3546, 24" Crosscut, 230V, 3PH Dual voltage 208-23...

Delta 40-640 20" Variable Speed Scroll Saw, Quick Change Blade, 1992, 115V, 1PH 20" Throat Clea...

Altendorf F45 2800PX Sliding Table Saw, 1987, Tilting Arbor Panel Saw, 9Ft Cap., 3PH, Cleaned, Ch...

Rockwell / SCMI, Short Stroke 5' Sliding Table Saw - Model SI 15F, 7.5HP, 3PH Cleaned, checked, ...

Altendorf F90 Sliding Table Saw, 1987, 10ft Capacity, 3PH, Table Bearings Replaced Altendorf F-9...

Altendorf F45 Sliding Table, Tilting Arbor Panel Saw, 10Ft Cap., 3PH Cleaned, Checked, Good cond...

Tannewitz Model U Table Saw, 1942, 16" Blade Capacity, 4" Blade projection, 5HP, 3PH, Cleaned, Ch...

Delta Contractor Saw, Fence, Tube rails, 1.5HP motor. Needs Repair electrical / capacitor needs ...

Powermatic 66 10 Inch Table Saw with 52 Inch Fence, 1988, 5HP, 3PH, 230V, Cleaned, Checked, New B...

Delta 10" Blade Cap Unisaw, Round Tube Rails and Fence, 5HP, 230/460V, 3 Phase Cleaned and check...

Cleaned and checked Mfg. 1981 1.5HP 115/230 (wired for 230V) 1Ph No bearing noise on coast d...

Cleaned and checked 1.5HP 230V 1PH 10" blade capacity Brand new Leeson motor No fence or th...

Pistorius MN-302S, 14" Toe Kick / Notching Saw, Reconditioned, 3PH 14" Blade Capacity Rail machi...

Pistorius Rebuilt MN-201, 12" Blade Cap. Double Miter Saw, 3PH Rebuilt machine About 90% plus d...

Pistorius MN-201 Notching Saw, 12" blade Cap., Notching Table, 1.5HP, 3PH Motors, Great Condition

Holz-Her 1265 Supercut Vertical Panel Saw, 1988, Cleaned, Checked, 230V, 3PH Just in, to be clea...